158X Series Type X2 Suppressor Capacitors
GENERAL Insulation Resistance (IR)
Metallized Polyester / Radial Leads
(@ 500 VDC and 20 C)
SPECIFICATIONS
Radial Leads
.
Terminal to Terminal:
Operating Temperature:
in Two Lengths
0.33F 15,000 M min
-40 C to +100 C
UL and CSA Approved
0.47F 5,000 M x F min
Voltage Range:
Flame Retardant Case
Both Terminals to Body:
275/250 VAC, 60 Hz
Meets UL94V-0
100,000 M min
Capacitance Range:
Potting End Fill
Maximum Pulse Rise Time
0.01 F to 2.2 F
Meets UL94V-0
F V/s F V/s
Capacitance Tolerance:
Used in applications where
.010 2800 0.22 1200
20% (Standard)
damage to the capacitor will
10% (Special)
not lead to the danger of .022 2400 0.47 1000
Dissipation Factor (DF)
electrical shock
.033 2400 0.68 1000
Lead Material tg 0.01 Max at 1,000 100kHz
.047 2000 1.00 800
Tinned Copper Clad Steel
.068 2000 1.50 800
RoHS Compliant
.100 1600 2.20 600
Agency Approvals Outline Dimensions
Safety Agency Standard File Number
UL UL-60384-14 E171988
CSA C22 2, No. 1-98/No.8 (250VAC) 1572961
VDE EN 60384-14 40018720
SEMKO EN 60384-14 1112778
NEMKO EN 60384-14 P10213462
Ratings
Inches Millimeters
Catalog Cap L T H S L T H S
d d
Part Number (F) Length Thickness Height Spacing Length Thickness Height Spacing
158X103 0.010 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6
158X123 0.012 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6
158X153 0.015 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6
158X183 0.018 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6
158X223 0.022 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6
158X273 0.027 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6
158X333 0.033 0.669 0.197 0.472 0.591 0.024 17.0 5.0 12.0 15.0 0.6
158X393 0.039 0.669 0.217 0.492 0.591 0.031 17.0 5.5 12.5 15.0 0.8
158X473 0.047 0.669 0.217 0.492 0.591 0.031 17.0 5.5 12.5 15.0 0.8
158X563 0.056 0.669 0.256 0.531 0.591 0.031 17.0 6.5 13.5 15.0 0.8
158X683 0.068 0.669 0.256 0.531 0.591 0.031 17.0 6.5 13.5 15.0 0.8
158X823 0.082 0.669 0.256 0.591 0.591 0.031 17.0 6.5 15.0 15.0 0.8
158X104 0.100 0.669 0.315 0.591 0.591 0.031 17.0 8.0 15.0 15.0 0.8
158X124 0.120 0.984 0.256 0.630 0.886 0.031 25.0 6.5 16.0 22.5 0.8
158X154 0.150 0.984 0.256 0.630 0.886 0.031 25.0 6.5 16.0 22.5 0.8
158X184 0.180 0.984 0.315 0.689 0.886 0.031 25.0 8.0 17.5 22.5 0.8
158X224 0.220 0.984 0.315 0.689 0.886 0.031 25.0 8.0 17.5 22.5 0.8
158X274 0.270 1.181 0.354 0.669 1.083 0.031 30.0 9.0 17.0 27.5 0.8
158X334 0.330 0.984 0.394 0.768 0.886 0.031 25.0 10.0 19.5 22.5 0.8
158X394 0.390 1.181 0.433 0.866 1.083 0.031 30.0 11.0 22.0 27.5 0.8
158X474 0.470 1.181 0.433 0.866 1.083 0.031 30.0 11.0 22.0 27.5 0.8
158X564 0.560 1.181 0.531 0.965 1.083 0.031 30.0 13.5 24.5 27.5 0.8
158X684 0.680 1.181 0.531 0.965 1.083 0.031 30.0 13.5 24.5 27.5 0.8
158X824 0.820 1.201 0.630 1.102 1.083 0.039 30.5 16.0 28.0 27.5 1.0
158X105 1.000 1.201 0.630 1.102 1.083 0.039 30.5 16.0 28.0 27.5 1.0
158X125 1.200 1.614 0.610 1.102 1.476 0.039 41.0 15.5 28.0 37.5 1.0
158X155 1.500 1.614 0.610 1.102 1.476 0.039 41.0 15.5 28.0 37.5 1.0
158X185 1.800 1.614 0.689 1.280 1.476 0.039 41.0 17.5 32.5 37.5 1.0
158X225 2.200 1.614 0.689 1.280 1.476 0.039 41.0 17.5 32.5 37.5 1.0
NOTE: If 10% tolerance is required, add 'K' to end of Catalog Number
NOTE: Parts are normally supplied with leads 30mm minimum
To order short leads, 3.5mm minimum length, add 'S' to end of Catalog Part Number.
CDE Cornell Dubilier 1605 E . Rodney French Blvd. New Bedford, MA 02744 P hone: (508)996-8561 Fax: (508)996-3830 www.cde.com158X Series Type X2 Suppressor Capacitors
Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and
data (collectively, the Information) in this datasheet or other publication are subject to change. The
customer is responsible for checking, confirming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (Cornell Dubilier) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter and Cornell Dubilier specifically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specific customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com