Type 160 Metallized Polyester Radial Lead Capacitors
Radial Box Metallized Polyester Capacitors
The Type 160 series radial lead metallized polyester box capacitors are constructed in
rugged rectangular plastic cases with lead spacings that are standard in the electronics
industry. All Type 160 capacitors are available in bulk with a .217 .039 lead length,
and they are good for general purpose applications such as bypass, decoupling,
energy storage/discharge and arc suppression.
Highlights
RoHS compliant
Rugged plastic case
Case and epoxy fill meets UL94V0
10 mm through 27.5 mm lead spacings
Non-inductively wound
Non-polar
Wire lead material, tinned copper clad steel
Specifications
Capacitance Range 0.0022 F to 10.0 F
Capacitance Tolerance 5%, 10%, 20%
Rated Voltage 63 to 1000 Vdc
Operating Temperature Range 55 C to +125 C (derating voltage to 1.25% per C above 85 C)
Maximum DC Leakage Current After 2 minutes, with rated voltage at +20 C
6.3 to 100 Vdc
I = .01CV or 3 A Max (whichever is greater)
160 Vdc after 3 min, with rated voltage at +20 C
I = .03CV or 10 A Max (whichever is greater)
C = Capacitance in (F)
V = Rated voltage
I = Leakage current in A
Dielectric Withstand Voltage 1.6 x rated voltage for 2 s @ +25 C 5 C
Dissipation Factor tan x 104 at 25 C 5 C
kHz C 1 F C >1 F
1 100 100
10 150
Total Self Inductance (L)
Pitch (mm) 10 15 22.5 27.5
L (nH) 9 10 18 18
Long Term Stability (after two years) Capacitance change C/C 3% under standard environmental conditions
Corona (Partial Discharge Inception Voltage)y 200 Vac for 100 Vdc, 200 Vdc
250 Vac for 400 Vdc, 630 Vdc
300 Vac for 1000 Vdc
Maximum Pulse Rise Time dv/dt
Pitch (mm)
Vn 10 15 22.5 27.5
63 3 1.5 1 1
100/160 6/8 3 2 1
250 11 7 4 3
400 20 10 5.5 5
630 30 15 8 7
1000 60 25 15 10
If the working voltage (V) is less than the nominal voltage (Vn), the capaci-
tor can work at higher dv/dt. In this case, the maximum value allowed is
obtained by multiplying the above value with the ratio Vn/V.
RoHS Compliant
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.comType 160 Metallized Polyester Radial Lead Capacitors
Test Method and Performance
Capacitor Outline Drawing
Insulation Resistance
Test Conditions
L T
Temperature 25 C 5 C
Max
Max
Voltage Charge Time 1 minute
Voltage Charge 50 Vdc for Vn < 100 Vdc
H
100 Vdc for Vn 100 Vdc
Max
Performance
For Vn > 100 Vdc 30,000 M for 0.33F
.196 -.040 / +0.06
10,000 M x F for C > 0.33F
(5.0 -1 / +1.5 mm)
For Vn 100 Vdc 10,000 M for C 0.1F
1,000 M x F for>0.1F
S
d
0.016
Damp Heat Test
0.003
(0.5 mm)
(0.076 mm)
Test Conditions
Temperature +40 C
Relative Humidity 95%
Note: The lead diameter is a maximum dimension
Test Duration 21 days
for lead spacing 15 mm and a nominal for lead
Performance
spacing >15 mm
Capacitance Change C/C 5%
4
DF Change tg 50 x 10 at 1 kHz
Insulation Resistance 50% of limit value
Life Test
Soldering
Test Conditions
Test Conditions
Temperature +85 C
Soldering Temperature 260 C 5 C
Test Duration 1000 hrs
Voltage Applied 1.25 x Vn
Soldering Duration 10 sec 1 sec
Performance
Performance
Capacitance Change C/C 5%
Capacitance Change C/C 2%
4
DF Change tg 30 x 10 at 10 kHz for C 1.0 F
4
DF Change tg 30 x 10 at 10 kHz for C 1.0 F
4
20 x 10 at 1 kHz for C >1.0 F
4
20 x 10 at 1 kHz for C >1.0 F Insulation Resistance 50% of limit value
Ratings RoHS Compliant
Cap Catalog Inches Millimeters
(F) Part Number L T H S d L T H S d
63 Vdc
.22 160224*63DF 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8
.27 160274*63DF 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8
.33 160334*63EF 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8
.39 160394*63EF 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8
.47 160474*63EF 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8
.56 160564*63DF 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8
.68 160684*63DF 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8
.68 160684*63GF 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8
.82 160824*63EF 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8
.82 160824*63HF 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8
1.0 160105*63HF 0.709 0.295 0.531 0.591 0.031 18.0 7.5 13.5 15.0 0.8
1.5 160155*63GF 0.709 0.236 0.492 0.591 0.031 18.0 6.0 12.5 15.0 0.8
2.2 160225*63HF 0.709 0.295 0.551 0.591 0.031 18.0 7.5 14.0 15.0 0.8
3.3 160335*63MF 1.043 0.276 0.650 0.886 0.031 26.5 7.0 16.5 22.5 0.8
4.7 160475*63NF 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8
6.8 160685*63OF 1.043 0.394 0.748 0.886 0.031 26.5 10.0 19.0 22.5 0.8
10.0 160106*63PF 1.260 0.433 0.787 1.083 0.031 32.0 11.0 20.0 27.5 0.8
* Indicates capacitance tolerance: J = 5%, K = 10%, M = 20%
CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com