Type 160 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors The Type 160 series radial lead metallized polyester box capacitors are constructed in rugged rectangular plastic cases with lead spacings that are standard in the electron- ics industry. All Type 160 capacitors are available in bulk with a .217 .039 lead length, and they are good for general purpose applications such as bypass, decoupling, energy storage/discharge and arc suppression. Highlights RoHS compliant Rugged plastic case Case and epoxy fill meets UL94V0 10 mm through 27.5 mm lead spacings Non-inductively wound Non-polar Wire lead material, tinned copper clad steel RoHS Compliant Specifications Capacitance Range: 0.0022 F to 10.0 F Voltage Range: 63 Vdc to 1000 Vdc Capacitance Tolerance: 5%, 10%, 20% Operating Temperature Range: 55 C to +125 C (derating voltage to 1.25% per C above 85 C) Dielectric Withstand Voltage: 1.6 x rated voltage for 2 sec +25 C 5 C 4 Dissipation Factor (DF): tan x 10 at 25 C 5 C kHz C 1 F C >1 F 1 100 100 10 150 Total Self Inductance (L): Pitch (mm) 10 15 22.5 27.5 L (nH) 9 10 18 18 Long Term Stability (after two years): Capacitance change C/C 3% under standard environmental conditions Corona (Partial Discharge Inception Voltage): 200 Vac for 100 Vdc, 200 Vdc 250 Vac for 400 Vdc, 630 Vdc 300 Vac for 1000 Vdc Maximum Pulse Rise Time (dv/dt): Pitch (mm) Vn 10 15 22.5 27.5 63 3 1.5 1 1 100/160 6/8 3 2 1 250 11 7 4 3 400 20 10 5.5 5 630 30 15 8 7 1000 60 25 15 10 If the working voltage (V) is less than the nominal voltage (Vn), the capacitor can work at higher dv/dt. In this case, the maximum value allowed is obtained by multiplying the above value with the ratio Vn/V. CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.comType 160 Metallized Polyester Radial Lead Capacitors Test Method and Performance Capacitor Outline Drawing Insulation Resistance Test Conditions L T Temperature 25 C 5 C Max Max Voltage Charge Time 1 minute Voltage Charge 50 Vdc for Vn < 100 Vdc H 100 Vdc for Vn 100 Vdc Max Performance For Vn > 100 Vdc 30,000 M for 0.33F .196 -.040 / +0.06 10,000 M x F for C > 0.33F (5.0 -1 / +1.5 mm) For Vn 100 Vdc 10,000 M for C 0.1F 1,000 M x F for 0.1F S d 0.016 Damp Heat Test 0.003 (0.5 mm) (0.076 mm) Test Conditions Temperature +40 C Relative Humidity 95% Note: The lead diameter is a maximum dimension Test Duration 21 days for lead spacing 15 mm and a nominal for lead Performance spacing >15 mm Capacitance Change C/C 5% 4 DF Change tg 50 x 10 at 1 kHz Insulation Resistance 50% of limit value Life Test Soldering Test Conditions Test Conditions Temperature +85 C Soldering Temperature 260 C 5 C Test Duration 1000 hrs Voltage Applied 1.25 x Vn Soldering Duration 10 sec 1 sec Performance Performance Capacitance Change C/C 5% Capacitance Change C/C 2% 4 DF Change tg 30 x 10 at 10 kHz for C 1.0 F 4 DF Change tg 30 x 10 at 10 kHz for C 1.0 F 4 20 x 10 at 1 kHz for C >1.0 F 4 20 x 10 at 1 kHz for C >1.0 F Insulation Resistance 50% of limit value Ratings RoHS Compliant Cap Catalog Inches Millimeters (F) Part Number L T H S d L T H S d 63 Vdc .22 160224*63DF 0.512 0.157 0.374 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .27 160274*63DF 0.512 0.157 0.374 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .33 160334*63EF 0.512 0.157 0.374 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .39 160394*63EF 0.512 0.157 0.374 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .47 160474*63EF 0.512 0.197 0.433 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .56 160564*63DF 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .68 160684*63DF 0.512 0.197 0.433 0.394 0.031 13.0 5.0 11.0 10.0 0.8 .68 160684*63GF 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.0 15.0 0.8 .82 160824*63EF 0.512 0.236 0.472 0.394 0.031 13.0 6.0 12.0 10.0 0.8 .82 160824*63HF 0.709 0.197 0.433 0.591 0.031 18.0 7.5 13.5 15.0 0.8 1.0 160105*63HF 0.709 0.197 0.433 0.591 0.031 18.0 7.5 13.5 15.0 0.8 1.5 160155*63GF 0.709 0.236 0.472 0.591 0.031 18.0 6.0 12.5 15.0 0.8 2.2 160225*63HF 0.709 0.295 0.531 0.591 0.031 18.0 7.5 14.0 15.0 0.8 3.3 160335*63MF 1.043 0.276 0.650 0.886 0.031 18.0 10.0 16.0 15.0 0.8 4.7 160475*63NF 1.043 0.335 0.669 0.886 0.031 26.5 8.5 17.0 22.5 0.8 6.8 160685*63OF 1.043 0.394 0.748 0.886 0.031 26.5 10.0 19.0 22.5 0.8 10.0 160106*63PF 1.260 0.433 0.787 1.083 0.031 26.5 13.0 23.0 22.5 0.8 * Indicates capacitance tolerance: J = 5%, K = 10%, M = 20% CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com