Type 168/185 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion The Type 168/185 ser ies radial lead metallized polyes- ter box capacitors are available in bulk ( Type 168) or on ammo pack or tape and reel ( Type 185). These ca- pacitors are construc ted in rugged rec tangular plastic cases and all come with 5.0 mm (0.197) lead spacing. They are good for general pur pose applications such as bypass, decoupling, energy storage/discharge and arc suppression. Highlights Case and epox y fill meets UL94V-0 5.0 mm (0.197) lead spacing Bulk , tape and reel or ammo pack Non-induc tively wound Non-polar Low leak age Lead mater ial: Tinned copper wire RoHS Compliant Specifications 0.001 F to 1.0 F Capacitance Range: 50 Vdc to 400 Vdc Voltage Range: 5%, 10%, 20% Capacitance Tolerance: 55 C to +125 C (with 50% Vdc derating >85 C ) Operating Temperature Range: 1.6 x rated voltage for 2 sec +25 C 5 C Dielectric Withstand Voltage: 4 tan x 10 at 25 C 5 C Dissipation Factor (DF): kHz C 0.1 F C > 0.1 F 1 100 100 10 150 150 100 300 Total Self Inductance (L): Approximately 7 nH Long Term Stability (after two years): Capacitance change C/C 3% under standard environmental conditions Maximum Pulse Rise Time (dv/dt): Vn Capacitance V/s 50 4 63 8 100 C > .0068 F 10 .0033 F < C < .0068 F 15 C .0033 F 30 250 44 400 100 I f the wor k ing voltage ( V ) is less than the nominal voltage ( Vn), the capacitor can work at higher dv/dt. I n this case, the maximum value allowed is obtained by multiplying the above value with the ratio Vn/V. CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.comType 168/185 Metallized Polyester Radial Lead Capacitors Test Method and Performance Capacitor Outline Drawing Insulation Resistance Test Conditions Temperature: 25 C 5 C T L Voltage Charge Time: 1 minute M ax M ax Voltage Charge: 10 Vdc for Vn < 100 Vdc 100 Vdc for Vn 100 Vdc H Performance M ax For Vn > 100 Vdc: C 0.33 F, 15,000 M .217 .039 C > 0.33 F, 5,000 S (5.5 1.0 mm) For Vn 100 Vdc: C 0.33 F, 30,000 M C > 0.33 F, 10,000 S d .003 S Damp Heat Test (0.076) .015 Test Conditions (0.4 mm) Temperature: +40 C Relative Humidity: 95% Lead length shown is as supplied on the 168 S er ies Test Duration: 21 days Performance Capacitance Change C/C: 5% DF Change tg: 0.005 (10 KH z) Soldering Insulation Resistance: 50% of limit value Test Conditions Life Test Soldering Temperature: 260 C 5 C Test Conditions REF Soldering Duration: 10 sec 1 sec Temperature: +85 C Performance Test Duration: 2000 hrs Capacitance Change C/C: 2% Voltage Applied: 1.25 x Vn 4 DF Change tg: 30 x 10 at 10 kH z Performance Insulation Resistance: limit value Capacitance Change C/C: 2% 4 DF Change tg: 30 x 10 at 10 kH z Insulation Resistance: 50% of limit value Ratings RoHS Compliant Catalog Tape & Reel Cap Inches Millimeters Part Number Ammo Pack (F) L T H S d L T H S d 50 Vdc 168104*50A-F 185104*50 A>-F 0.10 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168154*50A-F 185154*50 A>-F 0.15 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168224*50C-F 185224*50 C>-F 0.22 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168334*50C-F 185334*50 C>-F 0.33 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168474*50H-F 185474*50 H>-F 0.47 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168684*50F-F 185684*50 F>-F 0.68 0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6 168824*50G-F 185824*50 G>-F 0.82 0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6 168105*50G-F 185105*50 G>-F 1.00 0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6 63 Vdc 168473*63A-F 185473*63 A>-F 0.047 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168563*63A-F 185563*63 A>-F 0.056 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168683*63A-F 185683*63 A>-F 0.068 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168823*63A-F 185823*63 A>-F 0.082 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168104*63A-F 185104*63 A>-F 0.10 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168154*63C-F 185154*63 C>-F 0.15 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168184*63C-F 185184*63 C>-F 0.18 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168224*63C-F 185224*63 C>-F 0.22 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168274*63C-F 185274*63 C>-F 0.27 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168334*63H-F 185334*63 H>-F 0.33 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168474*63H-F 185474*63 H>-F 0.47 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168684*63F-F 185684*63 F>-F 0.68 0.283 0.177 0.374 0.197 0.024 7.2 4.5 9.5 5.0 0.6 168105*63G-F 185105*63 G>-F 1.00 0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6 * I ndicates capacitance tolerance: J = 5%, K = 10%, M = 20% I ndicates pack aging t ype: R = Tape and R eel, A = Ammo Pack > I ndicates tooling code: A = 16.5 mm, B = 18.5 mm (S ee H dimension in taping specifications) CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com