Type 168/185 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion The Type 168/185 series radial lead metallized polyester box capacitors are available in bulk (Type 168) or on ammo pack or tape and reel (Type 185). These capacitors are constructed in rugged rectangular plastic cases and all come with 5.0 mm (0.197) lead spacing. They are good for general purpose applications such as bypass, de- coupling, energy storage/discharge and arc suppression. Highlights Case and epoxy fill meets UL94V-0 5.0 mm (0.197) lead spacing Bulk, tape and reel or ammo pack Non-inductively wound Non-polar Low leakage Lead material: Tinned copper wire Specifications Capacitance Range 0.001 F to 1..0 F Capacitance Tolerance 5%, 10%, 20% Rated Voltage 50 to 400 Vdc Operating Temperature Range 55 C to +125 C (with 50% Vdc derating >85 C) Dielectric Withstand Voltage 1.6 x rated voltage for 2 s +25 C 5 C Dissipation Factor 120 Hz, +25 C tg x 104 at +25 C 5 C kHz C 0.1 F C > 0.1 F 1 100 100 10 150 150 100 300 Total Self Inductance (L) Approximately 7nH Maximum Pulse Rise Time (dv/dt) If the working voltage (V) is less than the nominal voltage (Vn), the capaci- tor can work at higher dv/dt. In this case, the maximum value allowed is obtained by multiplying the above value with the ratio Vn/V. Vn Capacitance V/s 50 4 63 8 100 C > .0068 F 10 .0033 F < C < .0068 F 15 C .0033 F 30 250 44 400 100 Long Term Stability (after two years) Capacitance change C/C 3% under standard environmental conditions RoHS Compliant CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.comType 168/185 Metallized Polyester Radial Lead Capacitors Test Method and Performance Capacitor Outline Drawing Insulation Resistance Test Conditions Temperature: 25 C 5 C T L Voltage Charge Time: 1 minute Max Max Voltage Charge: 10 Vdc for Vn < 100 Vdc 100 Vdc for Vn 100 Vdc H Performance Max For Vn > 100 Vdc: C 0.33 F, 15,000 M .217 .039 C > 0.33 F, 5,000 S (5.5 1.0 mm) For Vn 100 Vdc: C 0.33 F, 30,000 M C > 0.33 F, 10,000 S d .003 S Damp Heat Test (0.076) .015 Test Conditions (0.4 mm) Temperature: +40 C Relative Humidity: 95% Lead length shown is as supplied on the 168 Series Test Duration: 21 days Performance Capacitance Change C/C: 5% DF Change tg: 0.005 (10 KHz) Soldering Insulation Resistance: 50% of limit value Test Conditions Life Test Soldering Temperature: 260 C 5 C Test Conditions REF Soldering Duration: 10 sec 1 sec Temperature: +85 C Performance Test Duration: 2000 hrs Capacitance Change C/C: 2% Voltage Applied: 1.25 x Vn 4 DF Change tg: 30 x 10 at 10 kHz Performance Insulation Resistance: limit value Capacitance Change C/C: 2% 4 DF Change tg: 30 x 10 at 10 kHz Insulation Resistance: 50% of limit value Ratings Catalog Tape & Reel Cap Inches Millimeters Part Number Ammo Pack (F) L T H S d L T H S d 50 Vdc 168104*50A-F 185104*50 A>-F 0.10 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168154*50A-F 185154*50 A>-F 0.15 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168224*50C-F 185224*50 C>-F 0.22 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168334*50C-F 185334*50 C>-F 0.33 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168474*50H-F 185474*50 H>-F 0.47 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168684*50F-F 185684*50 F>-F 0.68 0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6 168824*50G-F 185824*50 G>-F 0.82 0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6 168105*50G-F 185105*50 G>-F 1.00 0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6 63 Vdc 168473*63A-F 185473*63 A>-F 0.047 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168563*63A-F 185563*63 A>-F 0.056 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168683*63A-F 185683*63 A>-F 0.068 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168823*63A-F 185823*63 A>-F 0.082 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168104*63A-F 185104*63 A>-F 0.10 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168154*63C-F 185154*63 C>-F 0.15 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168184*63C-F 185184*63 C>-F 0.18 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168224*63C-F 185224*63 C>-F 0.22 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168274*63C-F 185274*63 C>-F 0.27 0.283 0.098 0.256 0.197 0.020 7.2 2.5 6.5 5.0 0.5 168334*63H-F 185334*63 H>-F 0.33 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168474*63H-F 185474*63 H>-F 0.47 0.283 0.138 0.295 0.197 0.020 7.2 3.5 7.5 5.0 0.5 168684*63F-F 185684*63 F>-F 0.68 0.283 0.177 0.374 0.197 0.024 7.2 4.5 9.5 5.0 0.6 168105*63G-F 185105*63 G>-F 1.00 0.283 0.236 0.433 0.197 0.024 7.2 6.0 11.0 5.0 0.6 * Indicates capacitance tolerance: J = 5%, K = 10%, M = 20% Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm (See H dimension in taping specifications) CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com