Type 167/184 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors for Automatic Insertion The Type 167/184 series radial lead metallized polyester box capacitors are avail- able in bulk (Type 167) or on ammo pack or radial tape and reel (Type 184). These capacitors are constructed in rugged rectangular plastic cases and all come with 7.5 mm (0.3) lead spacing. They are good for general purpose applications such as bypass, decoupling, energy storage/discharge and arc suppression. Highlights Rugged plastic case Case and epoxy fill meets UL94V0 7.5 mm (0.3) lead spacing Bulk, tape and reel or ammo pack Non-inductively wound Non-polar Specifications Capacitance Range 0.001 F to 10.0 F Capacitance Tolerance 5%, 10%, 20% Rated Voltage 63 to 630 Vdc Operating Temperature Range 55 C to +125 C (with 50% Vdc derating >85 C) Dielectric Withstand Voltage 1.6 x rated voltage for 2 s +25 C 5 C Dissipation Factor 120 Hz, +25 C tg x 104 at +25 C 5 C 4 kHz tand x 10 1 100 10 150 Total Self Inductance (L) Approximately 8 nH Maximum Pulse Rise Time (dv/dt) Vn V/s 63 12 100 20 250 32 400 41 630 70 If the working voltage (V) is less than the nominal voltage (Vn), the capaci- tor can work at higher dv/dt. In this case, the maximum value allowed is obtained by multiplying the above value with the ratio Vn/V. Long Term Stability (after two years) Standard Environmental Storage Conditions Performance Capacitance Change C/C 3% RoHS Compliant CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.comType 167/184 Metallized Polyester Radial Lead Capacitors Capacitor Outline Drawing Test Method and Performance Insulation Resistance T L Test Conditions Max Max Temperature 25 C 5 C Voltage Charge Time 1 minute Voltage Charge 50 Vdc for Vn < 100 Vdc H 100 Vdc for Vn 100 Vdc Performance Max For Vn > 100 Vdc 30,000 M (50,000 M typical) For Vn 100 Vdc 10,000 M for C 0.1F .217 .039 1,000 M x F for > 0.1F (5.5 1.0 mm) Damp Heat Test Test Conditions d .003 S Temperature +40 C (0.076) .015 Relative Humidity 95% (0.4 mm) Test Duration 21 days Performance Lead length shown is as supplied on 167 Series Capacitance Change C/C 5% Soldering 4 DF Change tgd 50 x 10 at 1 kHz Test Conditions Insulation Resistance 50% of limit value Soldering Temperature 260 C 5 C Life Test Soldering Duration 10 sec 1 sec Test Conditions Performance Temperature +85 C Capacitance Change C/C 2% Test Duration 1000 hrs 4 DF Change tgd 30 x 10 at 10 kHz Voltage Applied 1.25 x Vn Insulation Resistance limit value Performance Capacitance Change C/C 5% 4 DF Change tgd 30 x 10 at 10 kHz Insulation Resistance 50% of limit value Ratings Inches Millimeters Cap Catalog Tape & Reel (F) Part Number Ammo Pack L T H S d L T H S d 63 Vdc .068 167683*63AF 184683*63 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .10 167104*63AF 184104*63 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .15 167154*63AF 184154*63 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .22 167224*63AF 184224*63 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .27 167274*63AF 184274*63 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .33 167334*63AF 184334*63 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .47 167474*63BF 184474*63 B>F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .68 167684*63CF 184684*63 C>F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 1.00 167105*63CF 184105*63 C>F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 100 Vdc .033 167333*100AF 184333*100 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .047 167473*100AF 184473*100 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .068 167683*100AF 184683*100 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .10 167104*100AF 184104*100 A>F 0.413 0.138 0.276 0.295 0.024 10.5 3.5 7.0 7.5 0.6 .12 167124*100BF 184124*100 B>F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .15 167154*100BF 184154*100 B>F 0.413 0.157 0.354 0.295 0.024 10.5 4.0 9.0 7.5 0.6 .22 167224*100CF 184224*100 C>F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 .33 167334*100CF 184334*100 C>F 0.413 0.197 0.433 0.295 0.024 10.5 5.0 11.0 7.5 0.6 * Indicates capacitance tolerance: J = 5%, K = 10%, M = 20% Indicates packaging type: R = Tape and Reel, A = Ammo Pack > Indicates tooling code: A = 16.5 mm, B = 18.5 mm, C = 16.0 mm (See H dimension in taping specifications) CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 www.cde.com