Type 330 55 C to 105 C Ultra-Long-Life, Switching Power Grade Radial Type 330 55 C to 105 C Ultra-Long-Life, Switching Power Grade Radial High Ripple and Ultra-Long Life The Type 330 is the ultra-long-life version of the Type 300 capacitor. With an astonishing, 50,000-hour expected life operating continuously at full load and 65 C the 330 is the choice for power supply outputs and UPS battery stifening. The exceptionally low ESRs enable high ripple-current capability. With series inductance of 12 to 16 nH and ripple currents to 16 amps one of these capacitors can save by replacing three or four of the 12.5 mm diameter capacitors routinely at the output of switching power supplies. Type 330 R delivers even lower ESR and higher ripple. Type 330 has three leads for rugged, reverse-proof mounting. Two leads are available as Types 331 and 331R. Highlights Expected Life > 20 years 45 C R ipple Current to 16 amps ESRs to 6 m > 90% capacitanc e at 40 C Replaces multiple capacitors RoHS Compliant Specifcations Operating Temperature: 55 C to +105 C Rated Voltage: 6.3 to 250 Vdc Capacitance: 270 F to 33,000 F Capacitance Tolerance: 6.3 to 100 Vdc 10 + 75%, 160 to 250 Vdc 10 + 50% Leakage Current: 0.5 CV A, 4 mA max, 5 min. Cold Impedance: 55 C multiple of 25 C Z 4 for 6.3 & 7.5 V, 3 for 10 to 50 V, 2 for > 50 V Ripple Current Multipliers: Ambient Temperature 45 C 55 C 65 C 75 C 85 C 95 C 105 C 1.66 1.52 1.37 1.20 1.00 0.75 0.36 Frequency 50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz 10 kHz & up .77 Diameter 6.3 & 7.5 V 0.82 0.86 1.00 1.15 1.21 1.24 1.25 10 to 40 V 0.78 0.83 1.00 1.20 1.30 1.35 1.36 50V 0.76 0.81 1.00 1.25 1.38 1.45 1.47 63 & 75 V 0.74 0.80 1.00 1.28 1.43 1.52 1.54 100 to 250 V 0.76 0.81 1.00 1.24 1.37 1.44 1.46 .895 Diameter 6.3 & 7.5 V 0.82 0.86 1.00 1.14 1.20 1.23 1.24 10 to 40 V 0.80 0.84 1.00 1.17 1.25 1.29 1.30 50V 0.75 0.80 1.00 1.27 1.42 1.50 1.52 63 & 75 V 0.75 0.80 1.00 1.26 1.40 1.48 1.50 100 to 250 V 0.76 0.81 1.00 1.25 1.38 1.46 1.48 1.02 Diameter 6.3 & 7.5 V 0.84 0.88 1.00 1.12 1.17 1.19 1.20 10 to 40 V 0.81 0.86 1.00 1.15 1.22 1.25 1.26 50V 0.76 0.81 1.00 1.23 1.35 1.42 1.44 63 & 75 V 0.77 0.81 1.00 1.23 1.35 1.42 1.44 100 to 250 V 0.76 0.81 1.00 1.24 1.37 1.44 1.46 Load Life: 10,000 h at full load at 85 C Capacitance 20% ESR 200% of limit DCL 100% of limit Shelf Life: 500 h at 105 C, capacitance, ESR and DCL, initial requirements CDM Cornell Dubilier 140 Technology Place Liberty, SC 29657 Phone: (864) 843-2277 Fax: (864) 843-3800 www.cde.comType 330 55 C to 105 C Ultra-Long-Life, Switching Power Grade Radial Outline Drawings .250 +0.015 +0.015 L -0.032 -0.032 L Case Dimensions Lead Spacing Insulated Epoxy Bare Can Type 330 Type 331 Case D 0.015 (0.4 mm) endseal D 0.015 (0.4 mm) Lead Diameter Code L 0.062 (1.6 mm) L Max L 0.030 (0.8 mm) S1 T S2 dia. AWG D x L D x L 0.020 (0.5 mm) 0.020 (0.5 mm) Case Dimensions in Inches GT 0.765 x 3.650 3.712 0.750 x 3.625 0.200 0.300 0.300 0.040 18 HP 0.890 x 2.650 2.712 0.875 x 2.625 0.300 0.400 0.300 0.040 18 HS 0.890 x 3.150 3.212 0.875 x 3.125 0.300 0.400 0.300 0.040 18 HT 0.890 x 3.650 3.712 0.875 x 3.625 0.300 0.400 0.300 0.040 18 JL 1.015 x 2.150 2.212 1.000 x 2.125 0.300 0.400 0.400 0.040 18 JP 1.015 x 2.650 2.712 1.000 x 2.625 0.300 0.400 0.400 0.040 18 JS 1.015 x 3.150 3.212 1.000 x 3.125 0.300 0.400 0.400 0.040 18 JT 1.015 x 3.650 3.712 1.000 x 3.625 0.300 0.400 0.400 0.040 18 Case Dimensions in Millimeters GT 19.4 x 92.7 94.3 19.1 x 92.1 5.08 7.62 7.62 1.02 18 HP 22.6 x 67.3 68.9 22.2 x 66.7 7.62 10.16 7.62 1.02 18 HS 22.6 x 80.0 81.6 22.2 x 79.4 7.62 10.16 7.62 1.02 18 HT 22.6 X 92.7 94.3 22.2 X 92.1 7.62 10.16 7.62 1.02 18 JL 25.8 x 54.6 56.2 25.4 x 54.0 7.62 10.16 10.16 1.02 18 JP 25.8 x 67.3 68.9 25.4 x 66.7 7.62 10.16 10.16 1.02 18 JS 25.8 x 80.0 81.6 25.4 x 79.4 7.62 10.16 10.16 1.02 18 JT 25.8 x 92.7 94.3 25.4 x 92.1 7.62 10.16 10.16 1.02 18 Part Numbering System 330R 333 U 6R3 JS 2 E Type Capacitance Tolerance Voltage Case Code Insulation Epoxy 330 - 3 leads 100 = 10 F M = 20% 6R3 = 6.3 V See 0 = Bare Can (blank) = no epoxy 330R - 3 leads 102 = 1000 F T = 10% +50% 063 = 63 V Rating 1 = Polyester E = Epoxy Low ESR U = 10 +75% 100 = 100 V 2 = PVC endseal 331 - 2 leads 8 = PVC w/ Standoffs 331R - 2 leads, Low ESR 9 = Polyester w/ Stand- 331A - Laydown 3 leads offs CDM Cornell Dubilier 140 Technology Place Liberty, SC 29657 Phone: (864) 843-2277 Fax: (864) 843-3800 www.cde.com