473MKP275KD Cornell Dubilier

Small Size Safety Agency Approved FEATURES Metalized Polypropylene EMI filters Across the Line APPLICATIONS (Not for use in Series with Mains See MPXB) Operating Temperature Range -40C to +110C Capacitance Tolerance +10% at 1 kHz, 20C UL/CSA ENEC CQC AC voltage (50/60 Hz) 250/275/310 250/275/310 310 Tan Dissipation Factor at 1 kHz and 20C .1% Max Capacitance Terminal to Terminal Terminal to Case Insulation Resistance >30000 M at 100VDC <0.33uF 15000 M 20C (<70% RH)for 1 minute >5000 M at 500VDC at 100VDC applied >30000 M at 100VDC >0.33uF 5000 MxuF >5000 M at 500VDC Self Inductance <1 nano-Henry per mm of lead spacing 1333VDC (4.3*310) VDC applied for 60 seconds Terminal to Terminal Cut-off current: 10mAdc Dielectric Strength Current limiting resistance: 1/V 2050VDC (50/60 Hz) applied between the terminals and case for 60 Terminal to case Seconds and 20C 1000 hours at 110C at 125% of rated voltage with once every hour the voltage is increased to 1000 VAC for 0.1 seconds Capacitance change <10% of initially measured value Life Expectancy Dissipation Factor <0.8% at 1kHz Insulation Resistance >50% of initially specified value (T-T) 56 days at 90 to 95% RH, 40C Capacitance change <10% of initially measured value Humidity test Dissipation Factor <0.8% at 1kHz Insulation Resistance >50% of initially specified value (T-T) Impulse voltage C< 1uF Vp=2.5kVDC (24 pulses) C> 1uF Vp=2.5kV C Capacitance temperature -200ppm/C, +100ppm/C coefficient Construction Metallized Polypropylene film Electrodes Vacuum deposited Metal layers Coating Flame retardant Solvent resistant plastic case with epoxy end fill (UL94V-0) Lead terminations tinned copper clad steel leads Sep-20 X capacitors are used to suppress electrical noise by reducing the input impedance of the device incorporating the capacitor. All Dimensions in (mm) X capacitors are connected across the supply line where failure of the capacitor will *17mm lead length available upon request not result in personal exposure to electrical shock. X2 capacitors are to be used in applications where the peak voltage is <1200V. Safety Standard Voltage Class Certificate number agency ANSI/UL 60384-14 250/275/310 FOWX2 E317135 UL/CSA CSA E60384-1 250/275/310 FOWX8 1041922 DIN EN60384-14 (VDE 0565-1- 1):2014-04 EN60384-14:2013-08 DIN EN60384-14/A1 (VDE 0565-1- 40040758 VDE/ENEC 1/A1):2017-04 EN60384- 250/275/310 X2 14:2013/A1:2016 IEC 60384-14:2013 IEC 60384-14:2013/AMD1:2016 CQC GB/T14472-1998 310 X2 CQC14001115428 Sep-20