505MHBS55K2H Cornell Dubilier

Small size - High voltage High Capacitance FEATURES UPS DC link AC/DC motor controls Power inverters APPLICATIONS Operating Temperature -40C to +100C Above +85C applied voltage must be de-rated by 1.5%/C Range +10% at 1 kHz, 25C Capacitance Tolerance +5% optional Code A35 A40 A45 A50 A55 A60 A70 85C 575 700 800 900 1000 1100 1275 VDC 70C 630 770 880 1000 1100 1200 1400 Surge 85C 660 805 920 1035 1150 1265 1465 Repetitive Voltage SVDC 70C 720 885 1010 1150 1265 1380 1610 Non- 85C 750 910 1040 1170 1300 1430 1655 repetitive 70C 815 1000 1140 1300 1430 1560 1820 SVDC Repetitive SVDC: Maximum repetitive voltage for 1 hour Max/Day Code A35 A40 A45 A50 A55 A60 A70 VDC 575 700 800 900 1000 1100 1275 AC Voltage 85C 240 285 315 350 400 420 440 VAC 70C 250 300 330 370 420 440 460 Dissipation Factor (MAX) C< 4 F 4 F<C<12 F 12 F<C<20 F 20 F<C<40 F 40 F<C<75 F C>75 F Tan (%) .06 .08 .11 .14 .17 .2 at 1 kHz and 25C Lead spacing Frequency range ESR Value (mm) ESR 27.5 10kHz - 60kHz See standard part listing (m ) 37.5 10kHz 45 kHz See standard part listing 52.5 10kHz 30 kHz See standard part listing RMS Current No RMS current is to be applied at temperatures > +95C See standard part listing, No ripple current is to be applied when the ambient temperature Ripple Current is>+95C 3000 MxuF (10000 MxuF typical) Not to exceed 3G Insulation Resistance After 1 minute of 100VDC applied between the terminals at 25C Self Inductance <1 nano-Henry per mm of lead spacing and lead length Long Term Stability Capacitance variation <1% MAX after 2 years Terminal to Terminal Terminal to case Dielectric Strength 150% of VDC or 150% of VAC 3KVAC at 50/60 Hz applied between the terminals applied for 10 Seconds and 25C and case for 60 Seconds and 25C Sep-20 >60000 with VAC, >200000 With WVDC applied at +70C Life Expectancy >30000 with VAC, >100000 With WVDC applied at +85C >10000 with 0.8xVAC, >30000 With 0.8xWVDC applied at +100C Failure Quota 300/billion component hours Test Condition Performance requirements Max Capacitance < +3%% of initially measured Temperature= +40C +2C change valued Damp Heat Test < 200% of initially specified Relative Humidity=93 +2% DF Change valued > 50% of minimum specified Test length= 56 days Insulation resistance value Resistance to soldering Heat Max Capacitance change <1% of initially measured value Solder bath temperature: +260C +/- DF Change < .1% at 1kHz 5C Exposure time: 10 seconds +/- 1 Insulation resistance >50% of minimum specified value second Construction Metallized Polypropylene film Electrodes Vacuum deposited Metal layers Coating Flame retardant Solvent resistant plastic case with epoxy end fill Lead free tinned copper leads Lead Terminations Sep-20