Type 730P, Metallized Polypropylene Film Capacitors High Frequency, Wrap and Fill The 730P series is designed and manufactured for use in many demanding power applications. They are non-inductively wound using the most reliable metallized polypropylene film available. A wide range of capacitance values, voltage ratings, lead terminations and sizes offer the designer an array of options to best meet the form, fit and function requirements specified. Highlights - Excellent AC performance - Low power dissipation - Low dielectric absorption - Close tolerance - High stability - Compliant to RoHS directive 2002/95/EC Specifications Capacitance Range 0.022 to 10.0 F Capacitance Tolerance 20% , 10%, 5% Rated Voltage 100 to 630 Vdc (70 V to 275 V 60 to 400 Hz) RMS RMS , Operating Temperature Range 55 C to 85 C Voltage Derating At +105 C, 50%of +85 C rating ESR 20 kHz to 100 kHz Dissipation Factor 0.1% maximum - Measure all units at 1000 Hz, at +25 C Insulation Resistance Measured at 100 WVDC after a 2 min charge: At +25 C: 200 000 M/F or 400 000 M minimum At +85 C: 10 000 M/F or 20 000 M minimum At +105 C: 1000 M/F or 2000 M minimum DC Voltage Test 200% of rated voltage for 2 minutes AC Voltage Test 130% of rated RMS voltage at 60 Hz for 15 seconds Vibration Test (Condition B) No mechanical damage, short, open or intermittent circuits DC Life Test 150% of rated voltage for 1000 h at +85 C. No open or short circuits. No visible damage. Maximum CAP 1.0% Minimum IR = 50% of initial limit Maximum DF = 0.12% Humidity Test 95% relative humidity at +40 C for 250 h. No visible damage. Maximum CAP 1.0% Minimum IR = 20% of initial limit Maximum DF = 0.12% AC Life Test 110% of rated RMS voltage at 60 Hz for 1000 h at +85 C Maximum CAP 5% Minimum IR = 50% of initial limit Maximum DF = 0.12% Physical Characteristics Lead Pull: 5 lb (2.3 g) for one min. No physical damage. Lead Bend: After three complete consecutive bend. No damage. RoHS Compliant Dimensions CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 Type 730P, Metallized Polypropylene Film Capacitors High Frequency, Wrap and Fill Part Numbering System 730P 106 X 5 2 XXX CDE Type Capacitance in F Tolerance Voltage Special Number 10 F 5 = 5% 1 = 100 Vdc Construction 9 = 10% 2 = 250 Vdc 4 = 400 Vdc 6 = 630 Vdc Ratings Maximum Ripple Current ESR (Arms ) at 20 Khz (2) (m) Case Size Case Temperature at 20 Khz CAPACITANCE Catalog Part D L to (F) Number Inches MM Inches MM 100 Khz +25C +35C +45C +55C +65C +75C +85C 100VDC 0.22 730P224X9100 0.275 7.0 0.75 19.0 - 2.3 2.3 2.3 2.3 2.3 1.8 1.0 0.27 730P274X9100 0.298 7.6 0.75 19.0 - 2.6 2.6 2.6 2.6 2.4 1.9 1.1 0.33 730P334X9100 0.324 8.2 0.75 19.0 - 2.8 2.8 2.8 2.8 2.6 2.2 1.2 0.39 730P394X9100 0.347 8.8 0.75 19.0 - 3.1 3.1 3.1 3.1 2.9 2.3 1.3 0.47 730P474X9100 0.376 9.6 0.75 19.0 37 3.7 3.4 3.1 2.8 2.5 2.0 1.4 0.56 730P564X9100 0.321 8.2 1.00 25.4 35 3.9 3.6 3.3 2.9 2.6 2.1 1.5 0.68 730P684X9100 0.348 8.8 1.00 25.4 33 4.1 3.8 3.5 3.1 2.8 2.2 1.6 0.82 730P824X9100 0.377 9.6 1.00 25.4 31 4.3 4.0 3.6 3.2 2.9 2.3 1.7 1.0 730P105X9100 0.421 10.7 1.00 25.4 26 5.5 5.1 4.7 4.2 3.6 2.8 2.6 1.2 730P125X9100 0.454 11.5 1.00 25.4 24 5.7 5.3 4.9 4.4 3.8 3.0 2.8 1.5 730P155X9100 0.500 12.7 1.00 25.4 20 6.1 5.5 5.1 4.6 4.0 3.2 3.1 1.8 730P185X9100 0.541 13.7 1.00 25.4 19 6.3 5.7 5.3 4.8 4.1 3.4 3.0 2.0 730P205X9100 0.486 12.3 1.25 31.8 18 6.5 6.0 5.5 4.9 4.2 3.5 3.2 2.2 730P225X9100 0.507 12.9 1.25 31.8 18 6.8 6.3 5.7 5.1 4.4 3.6 3.3 2.7 730P275X9100 0.554 14.1 1.25 31.8 17 7.1 6.5 6.0 5.3 4.6 3.7 3.4 3.0 730P305X9100 0.581 14.8 1.25 31.8 16 7.3 6.7 6.2 5.5 4.8 3.9 3.5 3.3 730P335X9100 0.606 15.4 1.25 31.8 16 7.4 6.8 6.4 5.6 4.9 4.0 3.6 3.9 730P395X9100 0.654 16.6 1.25 31.8 15 7.6 6.9 6.6 5.8 5.1 4.1 3.7 4.0 730P405X9100 0.537 13.6 1.75 44.5 15 7.8 7.0 6.7 5.9 5.2 4.2 3.8 4.7 730P475X9100 0.577 14.7 1.75 44.5 15 8.1 7.4 6.8 6.0 5.3 4.3 3.9 5.0 730P505X9100 0.593 15.1 1.75 44.5 14 8.3 7.6 7.0 6.2 5.4 4.4 4.0 5.6 730P565X9100 0.624 15.8 1.75 44.5 14 8.4 7.7 7.1 6.4 5.5 4.5 4.1 6.0 730P605X9100 0.644 16.4 1.75 44.5 14 8.5 7.8 7.2 6.5 5.6 4.6 4.2 6.8 730P685X9100 0.682 17.3 1.75 44.5 13 8.5 8.0 7.4 6.7 5.7 4.7 4.3 8.0 730P805X9100 0.735 18.7 1.75 44.5 13 8.6 8.3 7.7 6.8 6.0 4.8 4.4 8.2 730P825X9100 0.743 18.9 1.75 44.5 13 8.8 8.6 8.0 7.0 6.1 4.9 4.5 10.0 730P106X9100 0.815 20.7 1.75 44.5 12 9.0 9.0 8.5 7.6 6.6 5.4 4.9 Notes Other capacitance values and voltage ratings are available upon request (1) Part Numbers listed are for a capacitance tolerance of 10 %. To specifiy 20 % tolerance, change the X9 in the Part Number to X0 for 5 %, from X9 to X5. (2) The peak current pulse capability ot these capacitors is 10 A/F. The maximum rate voltage change is 10 V/s. CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830