Type 735P, Metallized Polypropylene Film Capacitors High Frequency, Wrap and Fill The 735P series is designed and manufactured for use in many demanding power applications. They are non-inductively wound using the most reliable metallized polypropylene film available. A wide range of capacitance values, voltage ratings, lead terminations and sizes offer the designer an array of options to best meet the form, fit and function requirements specified. Highlights - Excellent AC performance - Low power dissipation - Low dielectric absorption - Low ESR - Close tolerance - High stability - High ripple to 30 A - Compliant to RoHS directive 2002/95/EC Specifications Capacitance Range 1.0 to 30.0 F Capacitance Tolerance 10%, 5% DC Rated Voltage 100 WVdc to 400 WVdc Operating Temperature Range 55 C to 105 C ESR 20 kHz to 100 kHz Dissipation Factor 0.1% maximum - Measure all units at 1000 Hz, at +25 C V/ T: 10 V/ms maximum Insulation Resistance Measured at 100 WVDC after a 2 min charge: At +25 C: 200 000 M/F or 400 000 M minimum DC Voltage Test 200% of rated voltage for 2 minutes Vibration Test (Condition B) No mechanical damage, short, open or intermittent circuits DC Life Test 140% of rated voltage for 1000 h at +105 C. No open or short circuits. No visible damage. Maximum CAP 1.0% Minimum IR = 50% of initial limit Maximum DF = 0.10% Humidity Test 95% relative humidity at +40 C for 250 h. No visible damage. Maximum CAP 1.0% Minimum IR = 20% of initial limit Maximum DF = 0.12% Physical Characteristics Pull Test Wire Leads: 5 lb (2.3 g) for one min. No physical damage. Terminal Lugs: -10 lb (4.5 kg) for one min. No physical damage. Lead Bend: After three complete consecutive bend. No damage. Marking: Type or part number, capacitance and voltage. RoHS Compliant CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830 Type 735P, Metallized Polypropylene Film Capacitors High Frequency, Wrap and Fill Dimensions 1 & 2 F 100 Vdc ratings are No. 22 AWG wire .025 .635 Nominal Diameter D Max < .700 17.78 , No. 20 AWG wire .032 .812 Nominal Diameter D Max .700 17.78 , No. 18 AWG wire .040 1.016 Nominal Diameter 0.032 Part Numbering System 735P 106 X 5 2 XXX CDE Type Capacitance in F Tolerance Voltage Special Number 10 F 5 = 5% 1 = 100 Vdc Construction 9 = 10% 2 = 250 Vdc 4 = 400 Vdc CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8561 Fax: (508)996-3830