FCA0805C104M-J2 Cornell Dubilier

Type FCA Acrylic Surface Mount Film Capacitors Acrylic Stacked Metallized Film Capacitors for Filtering and Noise Attenuation Type FCA acrylic flm chips are non-inductive stacked metallized film capacitors which feature large capacitance values in standard surface mount case sizes. Highlights Smallest flm chips No piezoelectric efect Non-polarized, non-magnetic Low ESR 1.0 F/10V in 1206 case Filtering Decoupling Noise Attenuation Distortion Free Audio Type FCA acrylic film capacitors offer high lower ESR and lower DCL than an equivalent capacitance values in standard surface mount tantalum capacitor, and in high frequency case sizes. They excel in attenuating DC power applications it takes a tantalum capacitor with bus noise, and as ripple flters in dc to dc power ten times the capacitance to perform as well conversion circuits. As coupling capacitors in as the FCA capacitor. audio circuits, they yield distortion free sound and better high frequency fltering. The 1.0 The capacitor is constructed of noninductive F 10 Vdc rating ofers a flm capacitor that stacked layers of metallized acrylic resin flm is a direct replacement for tantalum A case with lead free solder (Sn/Ag/Cu) plated copper capacitors. The nonpolar FCA capacitor has alloy terminals. Specifcations Capacitance Range: 0.10 F to 1.0 F Capacitance Tolerance: 20% 1 kHz and +20 C Rated Voltage: 16 Vdc 1.0 F in 1206 case, 10 Vdc AC Voltage Rating: 12 Vrms Operating Temperature Range: 40 C to +85 C Dissipation Factor: 0.015 1 kHz and +20 C Dielectric Strength: 175% of rated voltage for 5 seconds Insulation Resistance (IR): After 1 minute 10 Vdc +20 C IR >1000 M (C 0.33 F) IR > 300 MF (C >0.33 F) Resistance to Soldering: The capacitor can withstand being heated in an oven at 235 C for 200 seconds RoHS Compliant Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.comType FCA Acrylic Surface Mount Film Capacitors Specifcations Life Test: Moisture Resistance: Apply 125% of the rated DC working voltage at 85 C After 500 hours with rated voltage applied at +40 C and for 1000 hours, and then stabilize them to +20 C. 90 to 95% RH, the capacitor will meet the following limits: Capacitors will meet the following limits: C = +20/3% of the initial measured value C = +7%/20% of the initial measured value DF 2.25% (at 1 kHz) DF 1.65% (at 1 kHz) IR > 100M (C 0.33 F) IR > 300M (C 0.33 F) IR > 30MF(C > 0.33 F) IR > 100MF(C > 0.33 F) Dielectric Strength: Capacitor will withstand 130% of the rated voltage for 1 minute. Ratings Maximum Current Catalog Part Capacitance Number dv/dt 10kHz 20kHz 50kHz 100kHz 200kHz 500kHz 1MHz (F) (V/s) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms) 10 Vdc 1.00 FCA1206A105M-H3 3 0.60 0.76 1.05 1.220 1.35 1.43 1.43 16 Vdc .10 FCA0805C104M-J2 19 0.15 0.21 0.3 0.375 0.46 0.58 0.65 .15 FCA1206C154M-H1 15 0.21 0.28 0.37 0.450 0.54 0.62 0.68 .22 FCA1206C224M-H1 13 0.25 0.33 0.45 0.550 0.66 0.76 0.84 .33 FCA1206C334M-H2 10 0.35 0.45 0.61 0.740 0.84 0.94 1.00 .47 FCA1206C474M-H3 7 0.39 0.52 0.71 0.860 1.00 1.10 1.17 .68 FCA1206C684M-H3 5 0.48 0.625 0.85 1.040 1.19 1.31 1.34 1.00 FCA1210C105M-G2 3 0.60 0.78 1.05 1.250 1.38 1.46 1.46 Outline Drawing Outline Dimensions Part Number Case Inches Millmeters Suffix Code L W H S L W H S (.008in.) (.008in.) (.008in.) (.012in.) (0.2mm) (0.2mm) (0.2mm) (0.3mm) J2 0805 0.079 0.049 0.039 0.018 2.0 1.25 1.0 0.45 H1 1206 0.126 0.063 0.032 0.026 3.2 1.60 0.8 0.65 H2 1206 0.126 0.063 0.039 0.026 3.2 1.60 1.0 0.65 H3 1206 0.126 0.063 0.055 0.026 3.2 1.60 1.4 0.65 G2 1210 0.126 0.098 0.055 0.026 3.2 2.50 1.4 0.65 Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com