Type FCA Acrylic Surface Mount Film Capacitors
Acrylic Stacked Metallized Film Capacitors for Filtering and Noise Attenuation
Type FCA acrylic film chips are non-inductive stacked metallized
film capacitors which feature large capacitance values in standard
surface mount case sizes.
Highlights
Smallest film chips
No piezoelectric effect
Non-polarized, non-magnetic
Low ESR
1.0 F/10V in 1206 case
Filtering Decoupling Noise Attenuation Distortion Free Audio
Type FCA acrylic film capacitors offer high capacitance values in and in high frequency applications it takes a tantalum capacitor
standard surface mount case sizes. They excel in attenuating DC with ten times the capacitance to perform as well as the FCA
power bus noise, and as ripple filters in dc to dc power conversion capacitor.
circuits. As coupling capacitors in audio circuits, they yield
distortion free sound and better high frequency filtering. The 1.0
The capacitor is constructed of noninductive stacked layers of
F 10 Vdc rating offers a film capacitor that is a direct replacement
metallized acrylic resin film with lead free solder (Sn/Ag/Cu) plated
for tantalum A case capacitors. The nonpolar FCA capacitor has
copper alloy terminals.
lower ESR and lower DCL than an equivalent tantalum capacitor,
Specifications
Capacitance Range 0.10 F to 1.0 F
Capacitance Tolerance 20% @ 1 kHz and +20 C
Rated Voltage 16 Vdc [1.0 F in 1206 case, 10 Vdc]
Operating Temperature Range 40 C to +85 C
AC Voltage Rating 12 Vrms
Dissipation Factor 0.015 @ 1 kHz and +20 C
Dielectric Strength 175% of rated voltage for 5 seconds
Moisture Resistance After 500 hours with rated voltage applied at +40 C and 90 to 95% RH, the
capacitor will meet the following limits:
C = +20/3% of the initial measured value
DF 2.25% (at 1 kHz)
IR > 100M (C 0.33 F)
IR > 30MF(C > 0.33 F)
Dielectric Strength: Capacitor will withstand 130% of the rated voltage for 1
minute.
Life Test Apply 125% of the rated DC working voltage at 85 C for 1000 hours, and
then stabilize them to +20 C.
Capacitors will meet the following limits:
C = +7%/20% of the initial measured value
DF 1.65% (at 1 kHz)
IR > 300M (C 0.33 F)
IR > 100MF(C > 0.33 F)
Insulation Resistance (IR) After 1 minute @10 Vdc; +20 C
IR >1000 M (C 0.33 F)
IR > 300 MF (C >0.33 F)
Resistance to Soldering The capacitor can withstand being heated in an oven at 235 C for 200 sec.
RoHS Compliant
Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.comType FCA Acrylic Surface Mount Film Capacitors
Ratings
For packaging codes/dimensions please click here for Application Guide
Maximum Current
Catalog Part
Capacitance Number dv/dt 10kHz 20kHz 50kHz 100kHz 200kHz 500kHz 1MHz
(F) (V/s) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms)
10 Vdc
1.00 FCA1206A105M-H3 3 0.60 0.76 1.05 1.220 1.35 1.43 1.43
16 Vdc
.10 FCA0805C104M-J2 19 0.15 0.21 0.3 0.375 0.46 0.58 0.65
.15 FCA1206C154M-H1 15 0.21 0.28 0.37 0.450 0.54 0.62 0.68
.22 FCA1206C224M-H1 13 0.25 0.33 0.45 0.550 0.66 0.76 0.84
.33 FCA1206C334M-H2 10 0.35 0.45 0.61 0.740 0.84 0.94 1.00
.47 FCA1206C474M-H3 7 0.39 0.52 0.71 0.860 1.00 1.10 1.17
.68 FCA1206C684M-H3 5 0.48 0.625 0.85 1.040 1.19 1.31 1.34
1.00 FCA1210C105M-G2 3 0.60 0.78 1.05 1.250 1.38 1.46 1.46
Outline Drawing
Outline Dimensions
Part Number Case Inches Millmeters
Suffix Code L W H S L W H S
(.008in.) (.008in.) (.008in.) (.012in.) (0.2mm) (0.2mm) (0.2mm) (0.3mm)
J2 0805 0.079 0.049 0.039 0.018 2.0 1.25 1.0 0.45
H1 1206 0.126 0.063 0.032 0.026 3.2 1.60 0.8 0.65
H2 1206 0.126 0.063 0.039 0.026 3.2 1.60 1.0 0.65
H3 1206 0.126 0.063 0.055 0.026 3.2 1.60 1.4 0.65
G2 1210 0.126 0.098 0.055 0.026 3.2 2.50 1.4 0.65
Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com
Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com