Type FCA Acrylic Surface Mount Film Capacitors Acrylic Stacked Metallized Film Capacitors for Filtering and Noise Attenuation Type FCA acrylic film chips are non-inductive stacked metallized film capacitors which feature large capacitance values in standard surface mount case sizes. Highlights Smallest film chips No piezoelectric effect Non-polarized, non-magnetic Low ESR 1.0 F/10V in 1206 case Filtering Decoupling Noise Attenuation Distortion Free Audio Type FCA acrylic film capacitors offer high capacitance values in and in high frequency applications it takes a tantalum capacitor standard surface mount case sizes. They excel in attenuating DC with ten times the capacitance to perform as well as the FCA power bus noise, and as ripple filters in dc to dc power conversion capacitor. circuits. As coupling capacitors in audio circuits, they yield distortion free sound and better high frequency filtering. The 1.0 The capacitor is constructed of noninductive stacked layers of F 10 Vdc rating offers a film capacitor that is a direct replacement metallized acrylic resin film with lead free solder (Sn/Ag/Cu) plated for tantalum A case capacitors. The nonpolar FCA capacitor has copper alloy terminals. lower ESR and lower DCL than an equivalent tantalum capacitor, Specifications Capacitance Range 0.10 F to 1.0 F Capacitance Tolerance 20% 1 kHz and +20 C Rated Voltage 16 Vdc 1.0 F in 1206 case, 10 Vdc Operating Temperature Range 40 C to +85 C AC Voltage Rating 12 Vrms Dissipation Factor 0.015 1 kHz and +20 C Dielectric Strength 175% of rated voltage for 5 seconds Moisture Resistance After 500 hours with rated voltage applied at +40 C and 90 to 95% RH, the capacitor will meet the following limits: C = +20/3% of the initial measured value DF 2.25% (at 1 kHz) IR > 100M (C 0.33 F) IR > 30MF(C > 0.33 F) Dielectric Strength: Capacitor will withstand 130% of the rated voltage for 1 minute. Life Test Apply 125% of the rated DC working voltage at 85 C for 1000 hours, and then stabilize them to +20 C. Capacitors will meet the following limits: C = +7%/20% of the initial measured value DF 1.65% (at 1 kHz) IR > 300M (C 0.33 F) IR > 100MF(C > 0.33 F) Insulation Resistance (IR) After 1 minute 10 Vdc +20 C IR >1000 M (C 0.33 F) IR > 300 MF (C >0.33 F) Resistance to Soldering The capacitor can withstand being heated in an oven at 235 C for 200 sec. RoHS Compliant Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.comType FCA Acrylic Surface Mount Film Capacitors Ratings For packaging codes/dimensions please click here for Application Guide Maximum Current Catalog Part Capacitance Number dv/dt 10kHz 20kHz 50kHz 100kHz 200kHz 500kHz 1MHz (F) (V/s) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms) (Arms) 10 Vdc 1.00 FCA1206A105M-H3 3 0.60 0.76 1.05 1.220 1.35 1.43 1.43 16 Vdc .10 FCA0805C104M-J2 19 0.15 0.21 0.3 0.375 0.46 0.58 0.65 .15 FCA1206C154M-H1 15 0.21 0.28 0.37 0.450 0.54 0.62 0.68 .22 FCA1206C224M-H1 13 0.25 0.33 0.45 0.550 0.66 0.76 0.84 .33 FCA1206C334M-H2 10 0.35 0.45 0.61 0.740 0.84 0.94 1.00 .47 FCA1206C474M-H3 7 0.39 0.52 0.71 0.860 1.00 1.10 1.17 .68 FCA1206C684M-H3 5 0.48 0.625 0.85 1.040 1.19 1.31 1.34 1.00 FCA1210C105M-G2 3 0.60 0.78 1.05 1.250 1.38 1.46 1.46 Outline Drawing Outline Dimensions Part Number Case Inches Millmeters Suffix Code L W H S L W H S (.008in.) (.008in.) (.008in.) (.012in.) (0.2mm) (0.2mm) (0.2mm) (0.3mm) J2 0805 0.079 0.049 0.039 0.018 2.0 1.25 1.0 0.45 H1 1206 0.126 0.063 0.032 0.026 3.2 1.60 0.8 0.65 H2 1206 0.126 0.063 0.039 0.026 3.2 1.60 1.0 0.65 H3 1206 0.126 0.063 0.055 0.026 3.2 1.60 1.4 0.65 G2 1210 0.126 0.098 0.055 0.026 3.2 2.50 1.4 0.65 Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com