Ordering information Small, Single phase input type: Screwless terminal (1-Stage filter) ESC -10 -472 -O ESC/ESM/ESP series 1 2 3 4 1 Series Name R 2 Rated Current 3 Line to ground capacitor code:Refer to table 1.1. table1.1 Line to ground capacitor code ESCESMESP Line to ground Leakage Current Code capacitor (Input 125/250V 60Hz) (nominal value) 000 5 A / 10 A max Not Provided 101 12.5 A / 25 A max 100pF 221 25 A / 50 A max 220pF 331 37.5 A / 75 A max 330pF 471 50 A / 100 A max 470pF 681 75.5 A / 150 A max 680pF 102 0.13 mA /0.25mA max 1,000pF 222 0.25 mA /0.5 mA max 2,200pF 332 0.38 mA /0.75mA max 3,300pF 472 0.5 mA /1.0 mA max 4,700pF *When the line to ground capacitor code is different, the attenuation characteristic is different. 4 Option D :DIN rail installation type * The dimensions change when the option is set. DIN rail installation type is option Electric cable is not appended. Refer to External view. Features of ESC/ESM/ESP series -Single Phase 250VAC (1-Stage filter) Small EMI/EMC Filters that change input-output terminal and protection earth terminal of EA series into - screwless terminal type -Torque management is unnecessary with screwless ESC : Attenuation type from 150kHz to 1MHz ESM : Low leakage current type ESP : Outside impulse attenuation type Specifications ESC-03-472 ESC-06-472 ESC-10-472 ESC-16-472 No. Items ESM-03-000 ESM-06-000 ESM-10-000 ESM-16-000 ESP-03-472 ESP-06-472 ESP-10-472 ESP-16-472 1 Rated Voltage V AC 1f 250 / DC250 2 Rated Current A 3 6 10 16 3 Test Voltage (Terminal-Mounting Plate) 2,500 VAC (Cutoff Current = 20mA), 1minute at room temperature and humidity 4 Isolation Resistance (Terminal-Mounting Plate) 500 VDC 500MW min at room temperature and humidity 5 Leakage current Refer to table 1.1 6 DC resistance 180mW max 110mW max 40mW max 20mW max 7 Safety agency approval temperatures -25 to +85 (Refer to Derating Curve) C 8 Operating temperature -40 to +85C (Refer to Derating Curve) 9 Operating humidity 20 to 95%RH (Non condensing) 10 Storage temperature/humidity -40 to +85C/20 to 95%RH (Non condensing) 2 11 Vibration 10 to 55Hz, 19.6m/s (2G), 3min. Period, 1hour each X, Y and Z axis 2 12 Impact 196.1m/s (20G), 11ms Once each X, Y and Z axis 13 Safety agency approvals UL1283, CSA C22.2 No.8 (C-UL), DIN EN60939 VDE0565 Teil3-1, ENEC (At only AC input) 14 Case size (without projection) /Weight 39X30X85 mm 1.54X1.18X3.35 inches (WXHXD) /170g max (Option : -D refer to external view) Circuit Diagram Derating Curve Case 100 80 3 1 60 CY LINE LOAD 40 CY 4 2 20 0 -404-30-20 0 50 55 60 70 80 90 : Mounting Plate Ambient Temperature C CY : Line to ground capacitor October 06, 2021 EA/ES-3 Load Factor % ESC/ESM/ESP series External view Standard Type 85 3.35 78 3.07 76.2 Screwless 3 Mounting Plate Terminal 0.5 75 Input 2.95 26.5 Screwless Terminal Terminal 1.04 6-Check hole f2.1 24 0.08 Output Protection Earth Terminal 0.94 Name Plate Screwless Terminal Input Screwless Terminal Terminal Protection Earth 2-f4.8 Output 0.19 Mounting Hole 6-Connection/release button Terminal Strip Gauge Tolerance : 1 0.04 Weight : 170g max Mounting Plate : Iron (surface finishing:nickel plating) t=1.0 0.04 Case : PBT Dimensions in mm, =inches Refer to instruction manual for details. DIN rail installation Type +2 8.5 85 -1 3.35 0.33 Screwless 78 Mounting Plate Terminal 3.07 Input 76.2 Screwless 26.5 Terminal 3 Terminal 1.04 6-Check hole f2.1 Protection Earth Output 24 0.08 Terminal 0.94 Name Plate Screwless Terminal Input Screwless Terminal Terminal Protection Earth Output 6-Connection/release button Terminal Strip Gauge Tolerance : 1 0.04 Weight : 170g max Mounting Plate : Iron(surface finishing:nickel plating) t=1.0 0.04 Case : PBT Dimensions in mm, =inches Refer to instruction manual for details. DIN rail (4.2) 0.17 Note when installing the EMI/EMC Filter on a DIN rail. DIN rail When the EMI/EMC Filter is grounded through the DIN rail, the proper noise attenuation may not Name Plate be achieved. Be sure to connect the protection earth (PE) of the EMI/EMC Filter body to the earth. At least one PE connection is required. October 06, 2021 EA/ES-4 4.25 777 4.25 77 7 0.28 0.28 0.28 0.17 0.28 0.28 0.28 0.17 (9) 7.75 14 7.75 14 0.35 0.55 0.31 0.55 0.31 12 10 12 10 MAX MIN Strip MAX MIN Strip 31.50.5 1.24 7 30 30 39 0.28 1.18 1.18 1.54 39 1.54