Ordering information Three phase input type(1-stage filter) FTA -50 -683 -O FTA series(40,50,60A) 1 2 3 4 1 Model Name R 2 Rated Current 3 Line to ground capacitor code:See table 1.1. table1.1 Line to ground capacitor code Leakage Current Line to ground Code (Input 250/500V 60Hz) capacitor (335only 250/400V 60Hz) (nominal value) 223 1.0mA/2.0mA max 22,000pF 683 2.5mA/5.0mA max 68,000pF 104 3.5mA/7.0mA max 100,000pF 335 160mA/250mA max 3.3 F *When the line to ground capacitor code is different, the attenuation characteristic is different. 4 Option H:Ultra high attenuation type 335 is not applied. Features of FTA series U:Improve differential mode attenuation (Rated voltage 250V) G:With switch of line to ground capacitor Book type (Space-saving type) Only335 is applied. - 1-stage filter General-purpose High-attenuation (150kHz - 1MHz) Leakage current 160mA/250mA max when * the switch state is ON (switched to ). - Selectab le leakage current value, Ultra high attenuation type335 for 10A/16A max when the switch state is OFF (switched to ). EU(Wye type with neutral earth system), With switch of line to ground capacitor- Specifications No. Items FTA-40-683 FTA-50-683 FTA-60-683 1 Rated Voltage V AC Three Phase 500 (voltage range:528 max) 50/60Hz *1 *2 2 Rated Current A 40 50 60 3 Test Voltage (Terminal-Mounting Plate) 2,500 VAC (Cutoff Current = 100mA), 1minute at room temperature and humidity *3 4 Isolation Resistance (Terminal-Mounting Plate) 500 VDC 100M min at room temperature and humidity *4 W 5 Leakage current 250/500V 60Hz 2.5mA/5.0mA max 6 DC resistance 8.5mW max 6mW max 4.5mW max 7 Safety agency approval temperatures -25 to +85C (Refer to Derating Curve) 8 Operating temperature -40 to +85C (Refer to Derating Curve) 9 Operating humidity 20 to 95%RH (Non condensing) 10 Storage temperature/humidity -40 to +85C/20 to 95%RH (Non condensing) 2 11 Vibration 10 to 55Hz, 19.6m/s (2G), 3min. Period, 1hour each X, Y and Z axis 2 12 Impact 196.1m/s (20G), 11ms Once each X, Y and Z axis 13 Safety agency approvals UL1283, CSA C22.2 No.8 (C-UL) , DIN EN60939 VDE0565 Teil3-1, ENEC 65X84X153 mm (WXHXD) (Option: -G refer to external view) 14 Case size (without projection) 2.56X3.31X6.02 inches (WXHXD) 15 Weight 1.2kg max *1 Only capacitor code 335, Three Phase D-connection : 400 (440 max), Wye-connection : 500 (528 max) *2 Only FTA-O O-O O O-U, Three Phase 250 (275 max) *3 Only capacitor code 335, 2,800VDC (Cutoff Current = 10mA), 1minute at room temperature and humidity. *4 Only capacitor code 335, Isolation resistance specification is deleted. Circuit Diagram (1) Line to ground capacitor code : 223, 683, 104 (2) Line to ground capacitor code : 335 (3) Line to ground capacitor code : 223, 683, 104 Option : U Case Case Case LINE LOAD LINE LOAD LINE LOAD 1 4 1 4 1 4 2 5 2 5 2 5 3 6 3 6 3 6 CY CY CY CY CY CY : Line to ground capacitor CY : Line to ground capacitor CY : Line to ground capacitor : Mounting Plate : Mounting Plate : Mounting Plate (4) FTA-O O-335-U (5) FTA-O O-335-G Derating Curve Case Case LINE LOAD LINE LOAD 100 1 4 1 4 80 2 5 2 5 60 3 6 3 6 40 20 CY CY SW 0 -40 -30 -20 40 50 60 70 80 90 CY : Line to ground capacitor SW : Switch CY : Line to ground capacitor Ambient Temperature C (The switch state is OFF) : Mounting Plate : Mounting Plate July 08, 2020 FTA-1 Load Factor % FTA series (40,50,60A) External view Standard Type 153 6.02 0.22 f5.5 132 Terminal Cover Mounting Hole 5.20 M4 72 Mounting Plate 2.83 Protection Earth 3-M5 3-M5 Input Output Name Plate Terminal Terminal M4 0.22X0.28 f5.5X7 Protection Earth Mounting Hole 0.5 140 5.51 Tolerance : 1 0.04 Weight : 1.2kg max Mounting Plate : Iron (surface finishing : nickel plating) t=1.2 0.05 Case : PBT Dimensions in mm, =inches Terminal block screw tightening torque M5 : 3.0N-m (30.7kgf-cm)max Protection Earth (PE) screw tightening torque M4 :1.6N-m (16.9kgf-cm)max Can not be mounted upside-down (mounted the top surface) With switch of line to ground capacitor ON/OFF 153 6.02 0.22 f5.5 132 Terminal Cover Mounting Hole 5.20 M4 72 Mounting Plate 2.83 Protection Earth 3-M5 3-M5 Input Output Name Plate Terminal Terminal With switch of line to M4 0.22X0.28 f5.5X7 ground capacitor Protection Earth Mounting Hole 0.5 140 5.51 Tolerance : 1 0.04 Weight : 1.2kg max Mounting Plate : Iron (surface finishing : nickel plating) t=1.2 0.05 Case : PBT Dimensions in mm, =inches Terminal block screw tightening torque M5 : 3.0N-m (30.7kgf-cm)max Protection Earth (PE) screw tightening torque M4 :1.6N-m (16.9kgf-cm)max Can not be mounted upside-down (mounted the top surface) The switch state is OFF at shipping Switch status ON : , OFF : HIGH LEAKAGE CURRENT first connect to earth July 08, 2020 FTA-2 65 65 2.56 2.56 17.25 17.25 0.68 0.68 11.5 13.5 11.5 13.5 0.45 0.45 0.53 0.53 +1.5 4.5 84 -0.5 84 3.31 0.18 3.31 550.5 0.5 55 2.17 2.17