Ordering information DC-DC Converters PCB Mount Type MGF W 15 24 05 -O MGFW15 1 2 3 4 5 6 1 Series name R 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) MG MODEL MGFW152405 MGFW152412 MGFW152415 MGFW154805 MGFW154812 MGFW154815 MAX OUTPUT WATTAGE W 15 15.6 15 15 15.6 15 *1 VOLTAGE V 5 or +10 12 or +24 15 or +30 5 or +10 12 or +24 15 or +30 DC OUTPUT CURRENT A 1.5 0.65 0.5 1.5 0.65 0.5 SPECIFICATIONS MODEL MGFW152405 MGFW152412 MGFW152415 MGFW154805 MGFW154812 MGFW154815 VOLTAGE V DC9 - 36 DC18 - 76 *2 INPUT CURRENT A 0.74typ 0.74typ 0.70typ 0.37typ 0.37typ 0.36typ EFFICIENCY % *2 84typ 88typ 89typ 84typ 87typ 88typ VOLTAGE V 5(+10) 12(+24) 15(+30) 5(+10) 12(+24) 15(+30) CURRENT A 1.5 0.65 0.5 1.5 0.65 0.5 LINE REGULATION mV 40max 60max 75max 40max 60max 75max *5 *5 *3 600max 750max 600max 750max 500max 500max LOAD REGULATION mV *4 250max 480max 600max 250max 480max 600max -20 to +60C 100max 100max 100max 100max 100max 100max RIPPLE mVp-p *6 -40 to -20C 120max 120max 120max 120max 120max 120max OUTPUT -20 to +60C 100max 100max 100max 100max 100max 100max RIPPLE NOISE mVp-p *6 -40 to -20C 150max 150max 150max 150max 150max 150max -20 to +60C 50max 150max 180max 50max 150max 180max TEMPERATURE REGULATION mV -40 to +60C 80max 240max 290max 80max 240max 290max DRIFT mV *7 50max 50max 60max 50max 50max 60max START-UP TIME ms 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING V *8 4.935 - 5.240 11.765 - 12.492 14.602 - 15.505 4.935 - 5.240 11.765 - 12.492 14.602 - 15.505 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT AND OTHERS REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) ISOLATION INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT 2 VIBRATION 10 - 55Hz, 98.0m/s (10G), 3minutes period, 60minutes each along X, Y and Z axis 2 IMPACT 490.3m/s (50G), 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 25.4X9.9X25.4mm 1X0.39X1 inches (WXHXD) / 20g max OTHERS COOLING METHOD Convection/Forced air *1 Single output +10V, +24V, +30V with no use of COM. *8 Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C. *2 Rated input 12V, 24V or 48V DC lo=100% * Parallel operation with other model is not possible. *3 Symmetrical loading from 5% to 100%. *4 Symmetrical loading from 20% to 100%. *5 Refer to the instruction manual 11. *6 Ripple and Ripple Noise is measured by using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) *7 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. MG-14 MGFW15 External view Name Plate Recommended Pad and Hole dia. (TOP VIEW) 6-f1.5 Case MG Bottom Cover f10.1 Unit : 0.1inch Dimension : mm Tolerance 0.5 0.02 Dimensions in mm, =inches +Vout Pin terminal material : Copper Plating treatment of terminal : Lead free plating Case material : Brass +Vin Plating treatment of case : Nickel plating COM Bottom Cover : FR4 (t=0.6) t=0.024 -Vin Please keep enough creepage distance with the pattern on PCB and other components. Weight 20g max -Vout RC 20.32 0.8 25.4 1.0 MG-15 2.54 7.62 5.08 0.1 0.3 0.2 3.5 9.9 10.16 10.16 0.14 0.39 0.4 0.4 25.4 1.0