Ordering information DC-DC Converters PCB Mount Type MGF W 1R5 24 12 -O MGFW1R5 1 2 3 4 5 6 1 Series name R 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional MODEL MGFW1R52412 MGFW1R52415 MGFW1R54812 MGFW1R54815 MAX OUTPUT WATTAGE W 1.56 1.50 1.56 1.50 VOLTAGE V *1 12 or +24 15 or +30 12 or +24 15 or +30 DC OUTPUT CURRENT A 0.065 0.05 0.065 0.05 SPECIFICATIONS MODEL MGFW1R52412 MGFW1R52415 MGFW1R54812 MGFW1R54815 VOLTAGE V DC9 - 36 (Surge voltage 50V, 100ms max) DC18 - 76 (Surge voltage 100V, 100ms max) *2 INPUT CURRENT A 0.081typ 0.079typ 0.041typ 0.040typ *2 EFFICIENCY % 81typ 80typ 81typ 79typ VOLTAGE V 12 (+24) 15 (+30) 12 (+24) 15 (+30) CURRENT A 0.065 0.05 0.065 0.05 LINE REGULATION mV 60max 75max 60max 75max *3 480max 600max 480max 600max LOAD REGULATION mV *4 600max 750max 600max 750max RIPPLE mVp-p *5 150max 150max 150max 150max OUTPUT RIPPLE NOISE mVp-p *5 200max 200max 200max 200max -20 to +85C 210max 260max 150max 180max TEMPERATURE REGULATION mV -40 to +85C 320max 390max 240max 290max *6 DRIFT mV 48max 60max 48max 60max START-UP TIME ms 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING V 11.64 - 12.36 14.55 - 15.45 11.64 - 12.36 14.55 - 15.45 PROTECTION CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT 2 VIBRATION 10 - 55Hz 98.0m/s (10G), 3minute period, 60minutes each along X, Y and Z axis 2 IMPACT 490.3m/s (50G) 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 17.0X12.0X8.5mm 0.67X0.48X0.34 inches (WXHXD) / 4g max OTHERS COOLING METHOD Convection/Forced air *1 Single output +24V, +30V with no use of COM. *2 Rated input 24V or 48V DC Io=100% *3 Symmetrical loading from 20% to 100%. *4 Symmetrical loading from 0% to 100%. *5 Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. *6 Dr ift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. * P arallel operation with other model is not possible. MG-38MGFW1R5 External view Recommended Pad and Hole dia. Model TOP VIEW 5-f0.9 Model 2.2 Unit : 0.1inch 2.54 2.8 0.09 0.1 12.7 Dimension : mm 0.11 0.5 Tolerance 0.5 0.02 Dimensions in mm, = inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Vin Vin Vout COM Vout Case material : PBT Weight 4g max 0.5 0.02 17 0.67 MG-39 0.5 0.25 0.02 0.01 3.5 12 8.5 0.14 0.48 0.34