Ordering information DC-DC Converters PCB Mount Type MG S 10 24 05 -O MGS10 1 2 3 4 5 6 1 Series name R 2 Single output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional MODEL MGS10053R3 MGS100505 MGS100512 MGS100515 MGS10123R3 MGS101205 MGS101212 MGS101215 MAX OUTPUT WATTAGE W 8.58 10.0 10.8 10.5 8.58 10.0 10.8 10.5 VOLTAGE V 3.3 5 12 15 3.3 5 12 15 DC OUTPUT CURRENT A 2.6 2.0 0.9 0.7 2.6 2.0 0.9 0.7 SPECIFICATIONS MODEL MGS10053R3 MGS100505 MGS100512 MGS100515 MGS10123R3 MGS101205 MGS101212 MGS101215 VOLTAGE V DC4.5 - 9 (Surge voltage 12.5V, 100ms max) DC9 - 18 (Surge voltage 25V, 100ms max) *1 INPUT CURRENT A 2.02typ 2.30typ 2.46typ 2.39typ 0.83typ 0.94typ 1.02typ 0.99typ *1 EFFICIENCY % 85typ 87typ 88typ 88typ 87typ 89typ 89typ 89typ VOLTAGE V 3.3 5 12 15 3.3 5 12 15 CURRENT A 2.6 2.0 0.9 0.7 2.6 2.0 0.9 0.7 LINE REGULATION mV 20max 20max 48max 60max 20max 20max 48max 60max LOAD REGULATION mV 20max 20max 48max 60max 20max 20max 48max 60max Io=30% - 75max 75max 100max 100max 75max 75max 100max 100max RIPPLE mVp-p *2 Io=0 - 30% 225max 225max 300max 300max 225max 225max 300max 300max OUTPUT Io=30% - 120max 120max 150max 150max 120max 120max 150max 150max RIPPLE NOISE mVp-p *2 Io=0 - 30% 300max 300max 400max 400max 300max 300max 400max 400max TEMPERATURE -20 to +50C 50max 50max 150max 180max 50max 50max 150max 180max REGULATION mV -40 to +50C 80max 80max 240max 290max 80max 80max 240max 290max *3 DRIFT mV 20max 20max 48max 60max 20max 20max 48max 60max START-UP TIME ms 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING V 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT AND REMOTE ON/OFF Provided (Negative logic L : ON, H : OFF) OTHERS MODEL MGS10243R3 MGS102405 MGS102412 MGS102415 MGS10483R3 MGS104805 MGS104812 MGS104815 MAX OUTPUT WATTAGE W 8.58 10.0 10.8 10.5 8.58 10.0 10.8 10.5 *1 VOLTAGE V 3.3 5 12 15 3.3 5 12 15 DC OUTPUT CURRENT A 2.6 2.0 0.9 0.7 2.6 2.0 0.9 0.7 SPECIFICATIONS MODEL MGS10243R3 MGS102405 MGS102412 MGS102415 MGS10483R3 MGS104805 MGS104812 MGS104815 VOLTAGE V DC18 - 36 (Surge voltage 50V, 100ms max) DC36 - 76 (Surge voltage 100V, 100ms max) *1 INPUT CURRENT A 0.42typ 0.47typ 0.50typ 0.49typ 0.21typ 0.24typ 0.25typ 0.25typ *1 EFFICIENCY % 87typ 89typ 90typ 90typ 87typ 89typ 90typ 90typ VOLTAGE V 3.3 5 12 15 3.3 5 12 15 CURRENT A 2.6 2.0 0.9 0.7 2.6 2.0 0.9 0.7 LINE REGULATION mV 20max 20max 48max 60max 20max 20max 48max 60max LOAD REGULATION mV 20max 20max 48max 60max 20max 20max 48max 60max Io=30% - 75max 75max 100max 100max 75max 75max 100max 100max RIPPLE mVp-p *2 Io=0 - 30% 225max 225max 300max 300max 225max 225max 300max 300max Io=30% - OUTPUT 120max 120max 150max 150max 120max 120max 150max 150max RIPPLE NOISE mVp-p *2 Io=0 - 30% 300max 300max 400max 400max 300max 300max 400max 400max -20 to +50C 50max 50max 150max 180max 50max 50max 150max 180max TEMPERATURE REGULATION mV -40 to +50C 80max 80max 240max 290max 80max 80max 240max 290max *3 DRIFT mV 20max 20max 48max 60max 20max 20max 48max 60max START-UP TIME ms 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING V 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 3.21 - 3.42 4.90 - 5.21 11.64 - 12.36 14.55 - 15.45 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT AND OTHERS REMOTE ON/OFF Provided (Negative logic L : ON, H : OFF) MG-8MGS10 GENERAL SPECIFICATIONS ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max ENVIRONMENT 2 VIBRATION 10 - 55Hz 98.0m/s (10G), 3minute period, 60minutes each along X, Y and Z axis 2 IMPACT 490.3m/s (50G) 11ms, once each along X, Y and Z axis SAFETY AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 22.0X12.0X9.5mm 0.87X0.48X0.38 inches (WXHXD) / 7g max OTHERS COOLING METHOD Convection/Forced air *1 Rated input 5V, 12V, 24V or 48V DC Io=100% *2 Ripple and ripple noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. *3 Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. * Parallel operation with other model is not possible. External view Model Recommended Pad and Hole dia. (TOP VIEW) 7-f0.9 2.11 2.54 2.8 0.09 0.1 17.78 0.11 0.7 Unit : 0.1inch Vin Vin RC NC Vout Vout NC Dimension : mm Tolerance 0.5 0.02 Dimensions in mm, = inches 0.5 0.02 Pin terminal material : Copper 22 Planting treatment of terminal : Lead free plating 0.87 Case material : PBT Weight 7g max MG-9 0.5 0.25 0.01 0.02 3.5 12 9.5 0.14 0.48 0.38