2200 SERIES REED RELAYS 2200 Series Reed Relays Ideally suited to the needs of Automated Test Equipment and RF requirements. The specicfi ation tables allow you to select the appropriate relay for your particular ap - plication. If your requirements differ, please consult your local representative or Cotos Factory. 2200 Series Features 2 u Very small footprint (0.17 in ), high reliability reed relays 12 u High Insulation Resistance - 10 available with model 2204 u High speed switching compared to electromechanical relays u Hermetically sealed contacts for long life u Epoxy coated steel shell provides magnetic shielding u Optional Electrostatic Shield for reducing capacitive coupling u Optional Coaxial Shield for 50 impedance and switching of fast rise time digital pulses offered on Form A u Relay models 2200-2301, 2200-2302 are ATE industry standards u Specicfi ally engineered for OEM designs and maintenance of existing production fixtures u RoHS compliant DIMENSIONS in Inches (Millimeters) .810 .210 (20.57) (5.33) .225 (5.72) .020 .500 (0.51) (12.7) .100 .125 (2.54) (3.18) .700 .018 Dia. pins (17.78) (0.46) 4 1 2 3 5 867 Bottom View Ordering Information XXXX-XX-XX1 Part Number 2 Model Number Shielding Options NOTE 2204 0=No Shielding u Coil Voltage Model s 2200-2301 & 2200-2302 represent 2211 1=Electrostatic Shield complete part numbers. 05=5 volts Coil Options (N/A on Model 2211) 12=12 volts 3=use for Model 2204 (12 volt coil) 2=Coaxial Shield and Model 2211 (5 & 12 volt coil) (N/A on Model 2211) 4=use for Model 2204 (5 volt coil) 07082013 tel: (401) 943.2686 fax: (401) 942.09202200- 2200- 2204 2211 MODEL NUMBER 2301 2302 Parameters Test Conditions Units 1 Form A 1 Form C 1 Form A 1 Form A Electrostatic Coaxial Shield Shield COIL SPECS. Nom. Coil Voltage VDC 5 12 5 12 5 5 Coil Resistance +/- 10%, 25 C 370 1500 230 1500 150 150 Operate Voltage Must Operate by VDC - Max. 3. 8 9.0 3.8 9.0 3.6 3.6 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 0.5 0.5 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 100 150 150 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.25 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.0 0.5 1.0 1.0 Contact Rating Max DC/Peak AC Resist. Watts 10 3 10 10 1 6 Life Expectancy-Typical Signal Level 1.0V, 10mA x 10 Ops. 500 100 500 500 6 Rated Loads x 10 Ops. 5 5 5 5 Static Contact 50mV, 10mA 0.100 0.150 0.150 0.150 Resistance (max. init.) Dynamic Contact 0.5V, 50mA 0.200 0.200 0.200 0.200 Resistance (max. init.) at 100 Hz, 1.5 msec RELAY SPECIFICATIONS Insulation Resistance Between all Isolated Pins 12 11 11 11 10 10 10 10 (minimum) at 100V, 25C, 40% RH Capacitance - Typical Shield Floating pF 0.9 0.9 0.9 0.9 Across Open Contacts Shield Guarding pF 0.2 N/A 0.2 0.2 Between Contacts VDC /peak AC 250 200 250 250 Dielectric Strength Contacts to Shield VDC/peak AC 250 N/A 250 250 (minimum) Contacts/Shield to Coil VDC/peak AC 1500 1500 1500 1500 Operate Time - At Nominal Coil Voltage, msec. 0.5 (typ.) 1.0 (typ.) 0.55 (max.) 0.55 (max.) including bounce 30 Hz Square Wave Release Time - Typical msec. 0.1 2.0 0.1 0.1 To p V i e w : 5 4 5 4 5 4 5 4 Dot stamped on top of relay refers to pin 1 location 6 3 6 3 6 3 6 3 Grid = .1x.1 (2.54mm x 2.54mm) 7 2 7 2 7 2 7 2 8 1 8 1 8 1 8 1 Notes: 1 Consult factory for life expectancy at other switching loads. 2 Model 2204, pin 7 is tied to optional electrostatic shield, pins 6 & 7 are tied to optional coaxial shield. Environmental Ratings: + + Storage Temp: -35C to 100C Operating Temp: -20C to 85C Solder Temp: 270C max 10 sec. max All electrical parameters measured at 25C unless otherwise specified. Vibration: 20 Gs to 2000 Hz Shock: 50 Gs 07082013 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.