9092-05-11 Coto

9091 & 9092 MINIATURE SIP RELAYS 9091 & 9092 Series Miniature Molded SIP Reed Relays e 9Th 091 is a compact version of the 9001 using 40% less board space (LxW). Because of its increased height, the 9092 model allows for incorporation of 2 Form A switches in the same board space. These miniature SIP relays utilize 10W switch technology, making these SIP relays ideal for use in ATE applications and other high reliability test, measurement and telecommunications applications where high board density and long life are key requirements. 9091 & 9092 Series Features u 9091 is a 10W SIP relay measuring .615 x .150 x .275 u 9092 is a 10W SIP relay measuring .600 x .150 x .350 u Magnetic shield reduces interaction u Optional coil suppression diode protects coil drive circuits u UL File E67117 - Contact factory for details 12 u High insulation resistance, 10 minimum u High speed switching u Molded thermoset body on integral lead frame design u High reliability, hermetically sealed contacts for long life u RoHS compliant DIMENSIONS in Inches (Millimeters) Model 9091 Model 9092 IDENTIFIES PIN 1 .150 Max .615 Max600 Typ. (3.81) (15.62) (15.24) .150 Max (3.81) .020 Typ . (.51) .350 Max .020 .125 .275 Max .125 .005 (8.89) (0.5) (3.18) (6.98) 1 (3.18 .831) 2 3 4 .020 Ref. 1 2 3 4 5 6 (.508) 1 .010 Typ. (0.25) .10 (2.54) .020 Ref.010 (0.51) (0.25) .50 (12.7) Typ150 .140 (3.81) (3.56) Ordering Information Part Number 90XX-XX-XX Model Number General Options 0=No Diode 9091 9092 1=Diode Coil Voltage 05=5 volts 12=12 volts Magnetic Shield (9091 only) 0=No Shield 1=Mag Shield (9091 Internal, 9092 External) 04082014 tel: (401) 943.2686 fax: (401) 942.09202,3 2,3 9091 9092 MODEL NUMBER Parameters Test Conditions Units (10 Watt) (10 Watt) 1 Form A SIP 2 Form A SIP COIL SPECS. Nom. Coil Voltage VDC 5 12 5 12 Max. Coil Voltage VDC 6.5 15.0 6.5 15.0 Coil Resistance +/- 10%, 25 C 500 1000 375 750 Operate Voltage Must Operate by VDC - Max. 3.75 9.0 3.75 9.0 Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0 CONTACT RATINGS Switching Voltage Max DC/Peak AC Resist. Volts 200 200 Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5 Carry Current Max DC/Peak AC Resist. Amps 1.5 1.5 Contact Rating Max DC/Peak AC Resist. Watts 10 10 1 6 Life Expectancy-Typical Signal Level 1.0V, 10mA x 10 Ops. 500 500 Static Contact 50mV, 10mA 0.125 0.150 Resistance (max. init.) Dynamic Contact 0.5V, 50mA 0.150 0.200 Resistance (max. init.) at 100 Hz, 1.5 msec RELAY SPECIFICATIONS Insulation Resistance Between all Isolated Pins 12 12 10 10 (minimum) at 100V, 25C, 40% RH Capacitance - Typical Across Open Contacts pF 0.7 1.0 Open Contact to Coil pF 2.0 1.4 Dielectric Strength Between Contacts VDC/peak AC 200 200 (minimum) Contacts to Coil VDC/peak AC 1500 1500 Operate Time - including At Nominal Coil Voltage, msec. 0.5 0.75 bounce - Typical 30 Hz Square Wave Release Time - Typical msec. 0.30 0.5 Top View: 1 1 Dot stamped on relay refers to pin 1 2 Grid = .1x.1 (2.54mm x 2.54mm) 2 3 4 3 5 4 6 Notes: 1 Consult factory for life expectancy at other switching loads. End of life is defined as Resistance >0.5 , or failure to open. 2 Optional diode is connected to pin 2(+) and pin 3(-) for 9091 pin 3(+) and pin 4(-) for 9092. Correct coil polarity must be observed. 3 9091 internal mag shield. 9092 external mag shield. Environmental Ratings: + + Storage Temp: -35C to 100C Operating Temp: -20C to 85C Solder Temp: 270C max 10 sec. max All electrical parameters measured at 25C unless otherwise specified. Vibration: 20 Gs to 2000 Hz Shock: 50 Gs 04082014 For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC.