CT10-2540-A2 Coto

CT10-G2 CT10 SERIES ENCAPSULATED MOLDED SWITCH CT10 Series e CTh T10 is an encapsulated molded dry reed switch. It is single-pole, single throw (SPST) type, having normally open ruthenium contacts. e sTh ensor is a double-ended type and may be actuated with an electromagnet, a per - manent magnet or a combination of both. e dTh evice is designed for SMD mounting and is available in three lead configura - tions. * NEW CT10-G2 now 260 C process temperature hardy. CT10 Series Features APPLICATIONS u Ideal for SMD pick and place u Proximity Sensing u Tape and reel packaging u Security Alarm Sensor u 10W rating u Level Sensor u Rugged encapsulation u Flow Sensor u Excellent life and reliability u Pulse Counter u RoHS compliant CT10-XXXX-YY MODEL NUMBER Parameters Units OPERATING CHARACTERISTICS Operate Range AT 10-40 Release Range AT 3-35 ELECTRICAL CHARACTERISTICS Switched Power (max) W 10 Switched Voltage DC (max) V 200 Switched Voltage AC, RMS value (max) V 140 Switched Current DC (max) mA 500 Switched Current AC, RMS value (max) mA 500 Carry Current DC (max) A 0.5 Breakdown Voltage (min) V 230 Contact Resistance (initial max) m 200 6 Insulation Resistance (min) M 10 ENVIRONMENTAL RATINGS Storage Temperature C -40 to + 125 Operating Temperature C -40 to + 125 Vibration Resistance G 10 Shock Resistance G 100 NOTES u AT values measured using a Philips 10JK coil. u Surface mount component processing temperature Model G1 & G2: 500F(260C) max for 1 minute dwell time Model G4 & A2: 439F(226C) max for 1 minute dwell time. u Temperature measured on leads where lead exits molded package. 06242015 tteell: (: (440011) 94) 9433..2266886 f6 faaxx: (: (440011) 94) 9422..09092200 NEW DIMENSIONS in Inches (Millimeters) CT10-XXXX-G1 CT10-XXXX-G2 .635/.645 (16.13/16.38mm) .765/.775 (19.43/19.68mm) .458 (11.6mm) Max458 (11.63mm) Max. 0.0120.003 STRESS RELIEF .115 (2.92mm) Max115 (2.92mm) Max025 (.63mm) Max010.002 .040 (1.02mm) Max040 (1.02mm) Max035/.045 (.89/1.14mm) .025 (.63mm) .035/.045 (.89/1.14mm) .095 (2.41mm) Max030 (.76mm) Max030 (.76mm) Max095 (2.41mm) Max. CT10-XXXX-G4 CT10-XXXX-A2 .765-.775 (19.4-19.7mm) .505 (12.8mm) .505 (12.8mm) 105 Ref. (SIDE VIEW) .095 (2.41mm) .005.005 (0.1270.127mm) .057 (1.45mm) .010 (0.25mm) .015 (0.38mm) Below Stando Surface .609/.619 (15.47/15.72mm) .045 (1.1mm) intersection .035 (0.9) .250 (6.35mm) .040 (1.02mm) .095 (2.4mm) (BOTTOM VIEW) .045 (1.14mm) .040 (1.01mm) .045 (1.14mm) Max045 (1.14mm) .095 (2.41mm) Max. ORDERING INFORMATION CT10-XXXX-YY Lead Conguration Subset: Series A complete part number is represented by the digits to the right of the G1 for Gull Wing Version 1 (16.4mm) CT10 CT10 series prefix followed by a suffix as shown below. G2/G4 for Gull Wing Version 2 (19.6mm) A2 for Axial EXAMPLE: CT10-1030-G1 is a CT10 sensor (10mm encapsulated switch) AT Range (measured after mold & lead form) with a sensitivity range from 10 to 30AT 10-30 10-40 lead ends are formed according to the G1 version 06242015 FForor m moostst re recceenntt d daattaa vis visitit w wwwww.c.cotoreotorellaayy.c.comom CCOOTTO TO TEECCHHNNOOLLOGOGYY, I, INCNC..