PRODUCT FAMILY DATA SHEET XLamp CXA2530 LED PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS The XLamp CXA2530 LED array expands Available in 4step, 3step and 2step Characteristics ............................................... 2 Cree LEDs family of highflux, multidie EasyWhite bins at 2700K, 3000K, Operating Limits ............................................. 2 arrays, offering high performance in an 3500K, 4000K & 5000K CCT and Flux Characteristics, EasyWhite Order easytouse platform. With XLamp LED 4step EasyWhite bins at 5700K & Codes and Bins .............................................. 3 lightingclass reliability, the CXA2530s 6500K CCT Flux Characteristics, ANSI White Order uniform emitting surface enables both Available in ANSI white bins at 4000K, Codes and Bins .............................................. 6 directional and nondirectional lighting 5000K, 5700K & 6500K CCT Relative Spectral Power Distribution ............ 7 applications and luminaire designs. Available in 70, 80, 90 and Electrical Characteristics ............................... 7 Available in 2step and 4step color 93minimum CRI options Relative Luminous Flux vs. Current ............... 8 consistency, and featuring a 19mm optical Forward voltage option: 36V class Typical Spatial Distribution ............................ 9 source, the CXA2530 brings new levels of 85C binning and characterization Performance Groups Brightness ................ 9 flux and efficacy to this form factor. Maximum drive current: 1600mA Performance Groups Chromaticity ........... 10 115 viewing angle, uniform EasyWhite Bins Plotted on the 1931 CIE The CX Family LED Design Guide provides chromaticity profile Color Space .................................................. 13 basic information on the requirements Topside solder connections ANSI White Bins Plotted on the 1931 CIE to use the CXA2530 LED successfully in Thermocouple attach point Color Space .................................................. 13 luminaire designs. NEMA SSL3 2011 standard flux bins Bin and Order Code Formats ....................... 14 RoHS and REACh compliant Mechanical Dimensions .............................. 14 UL recognized component (E349212) Thermal Design ............................................ 15 Notes ............................................................ 16 Packaging ..................................................... 17 Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com 2012-2021 Cree LED. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and CLD-DS54 the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp and EasyWhite are registered trademarks of Cree LED. UL and the UL logo are registered 1 REV 10A trademarks of UL LLC. XLAMP CXA2530 LED CHARACTERISTICS Characteristics Unit Minimum Typical Maximum Viewing angle (FWHM) degrees 115 ESD classification (HBM per MilStd883D) V 8000 DC forward current mA 1600* Reverse current mA 0.1 Forward voltage ( 800mA, 85C) V 36.4 Forward voltage ( 800mA, 25C) V 42 * Refer to the Operating Limits section. OPERATING LIMITS The maximum current rating of the CXA2530 depends on the case temperature (Tc) when the LED has reached thermal equilibrium under steadystate operation. The graph shown below assumes that the system design employs good thermal management (thermal interface material and heat sink) and may vary when poor thermal management is employed. Please refer to the Mechanical Dimensions section on page 14 for the location of the Tc measurement point. Another important factor in good thermal management is the temperature of the Light Emitting Surface (LES). Cree LED recommends a maximum LES temperature of 135C to ensure optimal LED lifetime. Please refer to the Thermal Design section on page 15 for more information on LES temperature measurement. CXA2530 1800 1600 1400 1200 1000 800 600 400 200 0 0 25 50 75 100 125 150 Case Temperature (C) 2012-2021 Cree LED. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and CLD-DS54 2 the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp and EasyWhite are registered trademarks of Cree LED. UL and the UL logo are registered REV 10A trademarks of UL LLC. If (mA)