CLM-DS05 LMR2 Rev 3 e Product family data sheet Cree LMR2 LED Module Cree LED modules provide lighting designers and manufacturers with simple, easy-to-adopt LED lighting solutions that reduce fixture development time and speed time-to-market. The Cree LMR2 LED module is the ideal choice for enabling rapid fixture development where bright, beautiful, long-life lighting is required. The LMR series of modules incorporates a compact system of integrated driver electronics, optics and primary thermal management together with 80- and 90-CRI options to address a wide range of residential and commercial lighting applications. This versatile LED lighting module jump starts the design process for 3-8 (76-203mm) downlights, wall sconces or pendant lights. BEnEfits foR LuMinaiRE DEsignERs Faster time-to-market and lower system cost with complete, compact light source solution Reduced development time with concurrently designed and tested optics, driver electronics, and primary thermal management Wide variety of design applications enabled with 2700K, 3000K, 3500K and 4000K correlated color temperatures Industry-leading 5-year limited warranty backed by patented, reliable Cree LeD technology Rapid regulatory approval and voluntary qualification of final luminaire enabled by: UL approval (120V) California Title 24 compliance (120V) LeD LM-80 data for US eNeRGY STAR Compliance with CE and other international standards (230V) BEnEfits foR EnD usERs Two color rendering options: 90 CRI for retail, museums and hospitality 80 CRI for general illumination Significant energy savings over traditional lighting through superior efficacy up to 72lm/W visually comfortable appearance whether the module is powered on or off Designed to last 35,000 hours at L 70 Consistent light quality over time and temperature Dimming down to 5% of rated light output using standard incandescent and electronic low-voltage dimmers No Uv or mercury units: mm Copyright 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and TrueWhite are Cree, Inc. registered trademarks and the Cree logo and the Cree TrueWhite Technology logo are trademarks of Cree, Inc. ENERGY STAR is a registered trademark 4600 Silicon Drive of the U.S. Environmental Protection Agency. UL and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names Durham, NC 27703 are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. USA Tel: +1.919.313.5300 www.cree.com/modulesLMR2 LED MoDuLE ChaRa CtERistiCs - 650 LuMEns ( tRuEWhitE ) nominal Module input Voltage CCt input Power Power Luminous flux CRi Efficacy (V)/f requency Dimming order Code (K) (W) f actor (lm)* (lm/W) (z)**h 10 65 120/60 > .80 TRIAC LMR020-0650-40F9-10100TW 650 4000 > 90 10.5 62 230/50 > .90 TRIAC LMR020-0650-40F9-20100TW 10 65 120/60 > .80 TRIAC LMR020-0650-35F9-10100TW 650 3500 > 90 10.5 62 230/50 > .90 TRIAC LMR020-0650-35F9-20100TW 10 65 120/60 > .80 TRIAC LMR020-0650-30F9-10100TW 650 3000 > 90 10.5 62 230/50 > .90 TRIAC LMR020-0650-30F9-20100TW 10 65 120/60 > .80 TRIAC LMR020-0650-27F9-10100TW 650 2700 > 90 10.5 62 230/50 > .90 TRIAC LMR020-0650-27F9-20100TW * Luminous flux measured at Tc = 55C ** Input ranges are 110130V/60Hz and 220240V/50Hz Maximum power = 12.1W Note: Cree maintains a tolerance of 7% on flux and power measurements ChaRa CtERistiCs - 750 LuMEns nominal Module input Voltage CCt input Power Power Luminous flux CRi Efficacy (V)/f requency Dimming order Code (K) (W) f actor (lm)* (lm/W) (hz)** 750 4000 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-40F8-10100eW 750 3500 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-35F8-10100eW 750 3000 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-30F8-10100eW 750 2700 > 80 11.5 65 120/60 > .90 TRIAC LMR020-0750-27F8-10100eW * Luminous flux measured at Tc = 55C ** Input range is 110130V/60Hz Maximum power = 13.5W Note: Cree maintains a tolerance of 7% on flux and power measurements ChRo MatiCity The Cree LMR2 LED module provides high color consistency around the specified color temperature. Individual LEDs are tested and matched in order to meet our designed chromaticity specification. Secondary optics can be added to the module but will reduce light output and may also alter the color characteristics of the final luminaire design. Copyright 2011-2016 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and TrueWhite are registered trademarks and the Cree logo and the Cree TrueWhite Technology logo are trademarks of Cree, Inc. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. UL and the UR logo are registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. 2