CLD-DS36 Rev 3A
Product family data sheet/
biNNiNG aNd labeliNG documeNt
cree Xlamp mt-G easyWhite leds
Product descriPtioN features table of coNteNts
Cree easyWhite color
label with Product Characteristicscree b ...............in code, 2
The XLamp MT-G easyWhite
temperatures from 2700 K to Qty, lot # ......................................
Flux Characteristics, Standard
LeD maximizes lumen density,
10
5000 K CCT
Order Codes and Bins ................ 2
eliminates chromaticity binning,
label with customer order code, ..
Wide Range of operating power
10
Relative Spectral Power
and enables luminaire and bulb
- up to 25 W
Qty, reel id, Po# ..........................
Distribution............................... 5
manufacturers to deliver consistent
10
85 C binning and
Relative Luminous Flux vs Junction
color and high efficacy light output in
characterization
Temperature ............................. 5
a new, compact, multi-die package.
Two voltage options: 6 v, 36 v
electrical Characteristics ............. 6
XLamp MT-G easyWhite LeDs can
Low effective thermal
Relative Luminous Flux vs
reduce LeD-to-LeD color variation
resistance: 1.5 C/W
Current .................................... 7
to within a 2-step MacAdam ellipse,
High lumen density
Typical Spatial Distribution .......... 8
94% smaller than the total area of
Wide viewing angle: 120
Performance Groups
the corresponding ANSI C78.377
80 minimum CRI at 2700 K and
Brightness ................................ 8
color region.
3000 K CCT
Performance Groups
85 and 90 minimum CRI
Chromaticity ............................. 9
The XLamp MT-G easyWhite LeD
available in 2700 K and 3000 K
Cree easyWhite Color
is the perfect choice for lighting CCT
Temperatures ..........................10
applications where high luminous
electrically neutral thermal
path Bin and Order Code Format ........10
flux output is required from a
Standard Order Codes and Bins ..11
single, small point source. example
aPPlicatioNs
Notes ......................................12
applications include: LED retrofit
MR, PAR and other directional
Reflow Soldering Characteristics .12
bulbs, commercial/retail display
retrofit bulbs
Mechanical Dimensions..............14
spotlights, and other indoor general
Commercial/residential
Tape and Reel ..........................15
illumination applications.
directional lighting
Packaging ................................16
General illumination
Copyright 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, Cree, Inc.Cree, Inc.
Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice.
the Cree logo and XLamp are registered trademarks and easyWhite is a trademark of Cree, Inc. 4600 Silicon Driv4600 Silicon Drivee
Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc.
Durham, NC 27703Durham, NC 27703
USUSA TA Tel: +1.919.313.5300el: +1.919.313.5300
www.cree.com/xlamp
WWW.CRee.COM/XLAMPxlamp mT-G EasyWhiTE lEDs
Product characteristics
characteristics unit minimum typical maximum
viewing Angle (FWHM) degrees 120
ESD Classification (HBM per Mil-Std-883D) Class 2
effective Thermal Resistance, Junction to Solder-point C/W 1.5
LeD Junction Temperatures C 150
DC Forward Current (6v) mA 1100 4000
DC Forward Current (36v) mA 185 700
Forward voltage (6v, 1100 mA, 85 C) v 5.6 6.7
Forward voltage (36v, 185 mA, 85 C) v 33.5 40.2
Temperature Coefficient of Voltage (6V) mv/C -4.5
Temperature Coefficient of Voltage (36V) mv/C -27
Reverse voltage (6v) v -5
Reverse Current (6v, 36v) mA 0.1
Moisture Sensitivity Level Rating (MSL) MSL 1
luf X characteristics, staNdard order codes, biNs, 6 Volt mt-G (1100 ma, t j =85 c)
The following table provides several base order codes for 6 volt XLamp MT-G easyWhite LeDs. For a complete description
of the order-code nomenclature, please reference page 10 of this document.
base order codes
min. luminous flux 2-step order code 4-step order code
cct
(lm) (tj =85 c)
color
range
chromaticity chromaticity
Group flux (lm)
region region
H0 560 MTGeZW-00-0000-0B00H050H MTGeZW-00-0000-0B00H050F
5,000 K J0 600 50H MTGeZW-00-0000-0B00J050H 50F MTGeZW-00-0000-0B00J050F
K0 650 MTGeZW-00-0000-0B00K050H MTGeZW-00-0000-0B00K050F
G0 520 MTGeZW-00-0000-0B00G040H MTGeZW-00-0000-0B00G040F
4,000 K H0 560 40H MTGeZW-00-0000-0B00H040H 40F MTGeZW-00-0000-0B00H040F
J0 600 MTGeZW-00-0000-0B00J040H MTGeZW-00-0000-0B00J040F
F0 480 MTGeZW-00-0000-0B00F035H MTGeZW-00-0000-0B00F035F
Standard
CRI
3,500 K G0 520 35H MTGeZW-00-0000-0B00G035H 35F MTGeZW-00-0000-0B00G035F
easyWhite
H0 560 MTGeZW-00-0000-0B00H035H MTGeZW-00-0000-0B00H035F
F0 480 MTGeZW-00-0000-0B00F030H MTGeZW-00-0000-0B00F030F
3,000 K G0 520 30H MTGeZW-00-0000-0B00G030H 30F MTGeZW-00-0000-0B00G030F
H0 560 MTGeZW-00-0000-0B00H030H MTGeZW-00-0000-0B00H030F
e0 440 MTGeZW-00-0000-0B00e027H MTGeZW-00-0000-0B00e027F
2,700 K F0 480 27H MTGeZW-00-0000-0B00F027H 27F MTGeZW-00-0000-0B00F027F
G0 520 MTGeZW-00-0000-0B00G027H MTGeZW-00-0000-0B00G027F
Notes:
Cree maintains a tolerance of 7% on flux and power measurements and 2 on CRI measurements
Minimum CRI for easyWhite color temperatures 27F, 27H, 30F, 30H is 80
Minimum CRI for easyWhite color temperatures 35F, 35H, 40F, 40H is 77
Typical CRI for easyWhite color temperatures 35F, 35H, 40F, 40H is 80
Minimum CRI for easyWhite color temperature 50F, 50H is 75
Copyright 2011 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks
and EasyWhite is a trademark of Cree, Inc.
of Cree, Inc.
22