CLD-DS36 Rev 9F
Product family data sheet
Cree XLamp MT-G EasyWhite LEDs
Pro DuCT DEsCriPTion FEATurEs TAbLE o F Con TEn Ts
Cree easyWhite color temperatures
The XLamp MT-G easyWhite LeD Characteristics ....................................... 2
from 2700K to 5000K CCT
maximizes lumen density, eliminates Flux Characteristics, easyWhite Order
Wide range of operating power - up
chromaticity binning and enables Codes and Bins 6V .............................. 3
to 25W
luminaire and bulb manufacturers to Flux Characteristics, easyWhite Order
85C binning and characterization
deliver consistent color and highefficacy Codes and Bins 36V ............................ 5
Two voltage options: 6V, 36V
light output in a new, compact, multi-die Relative Spectral Power Distribution .... 7
Low effective thermal resistance:
package. XLamp MT-G easyWhite LeDs Relative Luminous Flux vs. Junction
1.5C/W
can reduce LeD-to-LeD color variation Temperature ........................................... 7
High lumen density
to within a 2-step MacAdam ellipse, electrical Characteristics ....................... 8
Wide viewing angle: 120
94% smaller than the total area of the Relative Luminous Flux vs. Current ....... 9
80minimum CRI at 2700K and
corresponding ANSI C78.377 color region. Typical Spatial Distribution .................. 10
3000K CCT
Performance Groups Brightness ..... 10
85 and 90minimum CRI available in
The XLamp MT-G easyWhite LeD is the Performance Groups Chromaticity .. 11
2700K and 3000K CCT
perfect choice for lighting applications Cree easyWhite Color Temperatures
electrically neutral thermal path
where high luminous flux output is Plotted on the 1931 CIe Curve ............ 12
RoHS and ReACh compliant
required from a single, small point source. Bin and Order Code Formats ............... 12
UL recognized component
example applications include: LeD Reflow Soldering Characteristics ........ 13
(e349212)
retrofit bulbs, commercial/retail display Notes .................................................... 14
spotlights, and other indoor general Mechanical Dimensions ...................... 16
illumination applications. APPLiCATions Tape and Reel ....................................... 17
Packaging ............................................. 18
MR, PAR and other directional retrofit
bulbs
Commercial/residential directional
lighting
General illumination
Copyright 2011-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and Cree, Inc.
EasyWhite are registered trademarks and the Cree logo is a trademark of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
WWW.CREE.Com/XLAmp
XLamp mT-G EasyWhiTE LED
Ch ArACTErisTiCs
Characteristics unit Minimum Typical Maximum
viewing angle (FWHM) degrees 120
eSD withstand voltage (HBM per Mil-Std-883D) v 8000
effective thermal resistance, junction to solder point C/W 1.5
LeD junction temperature C 150
DC forward current (6V) mA 1100 4000
DC forward current (36V) mA 185 700
Forward voltage (6V, 1100mA, 85C) v 5.6 6.7
Forward voltage (36V, 185mA, 85C) v 33.5 40.2
Temperature coefficient of voltage (6V) mV/C 4.5
Temperature coefficient of voltage (36V) mV/C -27
Reverse voltage (6V) v 5
Reverse current (6V, 36V) mA 0.1
Copyright 2011-2017 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , XLamp and EasyWhite are registered trademarks and the Cree logo is a
trademark of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC.
2