CLD-DS38 Rev 6A Product family data sheet cree Xlamp Xm-l easyWhite leds Product descriPtion features table of contents The XLamp XM-L easyWhite LeD Available in 4-step and 2-step Characteristics ............................ 2 eliminates chromaticity binning, easyWhite bins at 2700 K, Flux Characteristics, Standard Order and enables luminaire and bulb 3000 K, 3500 K, 4000 K, 5000 K Codes and Bins, 6-volt XM-L eZW .. 3 manufacturers to deliver the CCT Flux Characteristics, Standard Order consistent color and high efficacy Wide range of operating Codes and Bins, 12-volt XM-L eZW 6 light output of a multi-die LeD in current up to 2 A 6 v Relative Spectral Power the compact XM-L footprint. XLamp 85 C binning and Distribution................................. 9 XM-L easyWhite LeDs can reduce characterization Relative Flux vs. Junction LeD-to-LeD color variation to within Available in 6-v and 12-v Temperature ............................... 9 a 2-step MacAdam ellipse, 94% versions electrical Characteristics ..............10 smaller than the total area of the Low thermal resistance: Relative Flux vs. Current .............11 corresponding ANSI C78.377 color 2.5 C/W Relative Chromaticity vs. Current region. Wide viewing angle: 115 and Temperature ........................12 Wide variety of CRI choices: Typical Spatial Distribution ...........13 The XLamp XM-L easyWhite LeD standard CRI as well as 80-, Thermal Design ..........................13 is the perfect choice for lighting 85-, 90-minimum CRI Performance Groups Brightness .14 applications where moderate to high electrically neutral thermal path Performance Groups luminous flux output is required Unlimited floor life at Chromaticity ..............................15 from a single, small point source. 30 C/85% RH Cree easyWhite Bins Plotted on the Example applications include: LED Reflow solderable - JEDEC 1931 CIe Color Space .................16 retrofit bulbs, commercial/retail J-STD-020C Cree ANSI White Bins Plotted on display spotlights, and other indoor RoHS- and REACh-compliant the 1931 CIe Color Space ............16 general-illumination applications. UL-recognized component Bin and Order Code Format ..........17 (e349212) Reflow Soldering Characteristics ...18 Notes ........................................19 Mechanical Dimensions................20 Tape and Reel ............................21 Packaging ..................................22 Cree, Inc. Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. 4600 Silicon DrivCree, Inc.e Cree , the Cree logo, XLamp and easyWhite are registered trademarks of Cree, Inc. Cree, the Cree logo and XLamp are registered trademarks of Cree, Inc. Durham, NC 277034600 Silicon Drive USA Tel: +1.919.313.5300Durham, NC 27703 USA Tel: +1.919.313.5300 www.cree.com/xlamp WWW.CRee.COM/XLAMPxlamp xm-l easywhite leds characteristics characteristics unit minimum typical maximum Thermal resistance, junction to solder point C/W 2.5 Viewing angle (FWHM) degrees 115 Temperature coefficient of voltage (6 V) mv/C -6.0 Temperature coefficient of voltage (12 V) mv/C -12.0 ESD withstand voltage (HBM per Mil-Std-883D) v 8000 DC forward current (6 v) mA 2000 DC forward current (12 v) mA 1000 Reverse current (6 v, 12 v) mA -0.1 Forward voltage ( 700 mA, 85 C, 6 v) v 5.7 7.0 Forward voltage ( 350 mA, 85 C, 12 v) v 11.5 14.0 LeD junction temperature C 150 Copyright 2011-2013 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo, XLamp and EasyWhite are Copyright 2010 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree, the Cree logo and XLamp are registered trademarks registered trademarks of Cree, Inc. of Cree, Inc. 22