CLD-DS38 REV 8I PRODUCT FAMILY DATA SHEET Cree XLamp XM-L EasyWhite LEDs PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS The XLamp XM-L EasyWhite (EZW) Available in 4-step and 2-step Characteristics ...........................................2 LED eliminates chromaticity binning, and EasyWhite bins at 2700K, 3000K, Flux Characteristics, Standard Order enables luminaire and bulb manufacturers 3500K, 4000K, 5000K CCT Codes and Bins, 6Volt XML EZW ............3 to deliver the consistent color and high Wide range of operating currentup Flux Characteristics, Standard Order efficacy light output of a multidie LED in to 2A 6V Codes and Bins, 12Volt XML EZW ..........6 the compact XM-L footprint. XLamp XM-L 85C binning and characterization Relative Spectral Power Distribution ........9 EasyWhite LEDs can reduce LED-to-LED Available in 6V and 12V versions Relative Flux vs. Junction Temperature ....9 color variation to within a 2-step MacAdam Low thermal resistance: 2.5C/W Electrical Characteristics .........................10 ellipse, 94% smaller than the total area of Wide viewing angle: 115 Relative Flux vs. Current ..........................11 the corresponding ANSI C78.377 color Wide variety of CRI choices: standard Relative Chromaticity vs. Current and region. CRI as well as 80-, 85-, 90-minimum Temperature .............................................12 CRI Typical Spatial Distribution ......................13 The XLamp XM-L EasyWhite LED is the Electrically neutral thermal path Thermal Design ........................................13 perfect choice for lighting applications Unlimited floor life at 30C/85% Performance Groups Brightness .........14 where moderate to high luminous flux RH Performance Groups Chromaticity ......14 output is required from a single, small Reflow solderable JEDEC Cree EasyWhite Bins Plotted on the point source. Example applications JSTD020C 1931 CIE Color Space ..............................15 include: LED retrofit bulbs, commercial/ RoHS and REACh compliant Cree ANSI White Bins Plotted on the retail display spotlights, and other indoor UL recognized component 1931 CIE Color Space ..............................16 general-illumination applications. (E349212) Bin and Order Code Formats ...................16 Reflow Soldering Characteristics ............17 Notes ........................................................18 Mechanical Dimensions ..........................20 Tape and Reel ...........................................21 Packaging .................................................22 Copyright 2011-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo, Cree, Inc. XLamp , XM-L and EasyWhite are registered trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 WWW.CREE.COM/XLAMP XLAMP XM-L EASYWHITE LED CHARACTERISTICS Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point C/W 2.5 Viewing angle (FWHM) degrees 115 Temperature coefficient of voltage (6V) mV/C 6.0 Temperature coefficient of voltage (12V) mV/C 12.0 ESD withstand voltage (HBM per Mil-Std-883D) V 8000 DC forward current (6V) mA 2000 DC forward current (12V) mA 1000 Reverse current (6V, 12V) mA 0.1 Forward voltage ( 700mA, 85C, 6V) V 5.7 7.0 Forward voltage ( 350mA, 85C, 12V) V 11.5 14.0 LED junction temperature C 150 Copyright 2011-2019 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree , the Cree logo, XLamp , XM-L and EasyWhite are registered trademarks of Cree, Inc. UL and the UR logo are registered trademarks of UL LLC. 2