XPLAWT-00-0000-000HU40E7 Cree

PRODUCT FAMILY DATA SHEET XLamp XP-L LEDs XP-L High Density LED XP-L High Intensity LED PRODUCT DESCRIPTION FEATURES TABLE OF CONTENTS XLamp XP-L LEDs are available in two Available in white, 70-CRI white, 80-CRI Characteristics ............................................... 2 versions: High Density (HD) and High white, 85-CRI white and 90-CRI white Flux Characteristics - XP-L High Density ...... 3 Intensity (HI). ANSI-compatible chromaticity bins Flux Characteristics - XP-L High Intensity .... 8 Binned at 85C Relative Spectral Power Distribution .......... 12 The XLamp XP-L HD LED is the highest Maximum drive current: 3000mA Relative Flux vs. Junction Temperature ...... 12 performing discrete in Cree LEDs HD class Low thermal resistance: 0.5C/W Electrical Characteristics ............................. 13 of LEDs, delivering the next generation of Wide viewing angle: 125 (XP-L HD), Relative Flux vs. Current .............................. 13 lumen output and efficacy in the compact 115 (XP-L HI) Relative Chromaticity vs. Current ................ 14 3.45mmx3.45mm XP footprint. Cree LEDs Unlimited floor life at 30C/85% RH Relative Chromaticity vs. Temperature ....... 15 HD LEDs, optimized to deliver maximum Reflow solderable - JEDEC J-STD-020C Typical Spatial Distribution .......................... 16 lumen output in a small form factor, enable Electrically neutral thermal path Thermal Design ............................................ 16 lighting manufacturers to improve the RoHS and REACh compliant Performance Groups Luminous Flux....... 17 performance of any lighting design, create UL recognized component (E349212) Performance Groups Chromaticity .......... 18 smaller and less expensive systems, and Standard Cool White Kits Plotted on ANSI develop new lighting solutions that were Standard Chromaticity Regions .................. 21 previously not possible. Standard Warm and Neutral White Kits Plotted on ANSI Standard Chromaticity The XLamp XP-L HI LED is the first of Cree Regions ......................................................... 22 LEDs new class of high-intensity LEDs Standard Chromaticity Kits ......................... 24 optimized to deliver maximum candela Bin and Order Code Formats ....................... 25 through secondary optics. Built on Cree Reflow Soldering Characteristics ................ 26 LEDs breakthrough SC5 Technology Notes ............................................................ 27 Platform, the XP-L HI LED delivers 120 Mechanical Dimensions .............................. 29 percent more candela than the XP-L HD Tape and Reel ............................................... 31 LED through the same optic. The XP-L HI Packaging ..................................................... 33 LED leverages the industrys highest single- die performance and a new innovative primary optic design that radically reduces the optical source size to deliver both lumens and intensity. Cree LED / 4400 Silicon Drive / Durham, NC 27703 USA / +1.919.313.5330 / www.cree-led.com 2014-2021 Cree LED. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and CLD-DS97 the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp and SC5 Technology are registered trademarks of Cree LED. UL and the UL logo are 1 REV 7A registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association. XLAMP XP-L LED CHARACTERISTICS Characteristics Unit Minimum Typical Maximum Thermal resistance, junction to solder point* C/W 0.5 Viewing angle (FWHM) - XP-L High Density degrees 125 Viewing angle (FWHM) - XP-L High Intensity degrees 115 Temperature coefficient of voltage mV/C -1.3 ESD withstand voltage (HBM per Mil-Std-883D) V 8000 DC forward current mA 3000 Reverse voltage V 1 Forward voltage ( 1050mA, 85C) V 2.79 3.25 LED junction temperature C 150 * Thermal resistance measurement was performed per the JEDEC JESD51-14 standard. 2014-2021 Cree LED. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks, and CLD-DS97 the Cree LED logo is a trademark, of Wolfspeed, Inc. XLamp and SC5 Technology are registered trademarks of Cree LED. UL and the UL logo are 2 REV 7A registered trademarks of UL LLC. Other trademarks, product, and company names are the property of their respective owners and do not imply specific product and/or vendor endorsement, sponsorship or association.