Clock Oscillator C32xx/C39xx Model 57 mm SMD, 5V, HCMOS Frequency Range: 1.544 MHz to 100.000 MHz Frequency Stability Options: 20*, 25, 50, 100 (ppm) Temperature Range: (standard) 0C to +70C (Option M) -20C to +70C (Option E*) -40C to +85C Storage Temperature: -45C to 90C Input Voltage: 5.0V 0.5V Input Current: 60mA Max Standby Current: 10uA Max Output: HCMOS Symmetry: (Standard 2) 40/60% Max 50% Vdd (Option 9) 45/55% Max 50% Vdd Rise/Fall Time: 6ns Max 20% to 80% Vdd Logic:0 = 10% Vdd Max1 = 90% Vdd Min Disable Time: 200ns Max Start-up Time: 10ms Max Load: 30pF Max Jitter RMS: 12kHz~20MHz 0.5ps Typical, 1ps Max Sub-harmonics: None st Aging: <3ppm 1 year, <1ppm every year thereafter *available in select frequencies -40/85 Model C32xx/C39xx is a 1.544 MHz to 100.000 MHz HCMOS Clock Mechanical: Oscillator operating at 5.0 Volts. The Shock: MIL-STD-883, Method 2002, Condition B oscillator utilizes Fundamental or Vibration: MIL-STD-883, Method 2007, Condition A High Q Third Overtone crystal Solderability: MIL-STD-883, Method 2003 design providing very low Jitter and Solvent Resistance: MIL-STD-202, Method 215 Phase Noise. No Sub-Harmonics are Resistance to Soldering Heat: MIL-STD-202, Method 210, Condition I or J present in the Output Signal. Environmental: Thermal Shock: MIL-STD-883, Method 1011, Condition A Applications: Moisture Resistance: MIL-STD-883, Method 1004 Digital Video SONET/SDH/DWDM Storage Area Networks Rev: S Broadband Access Date: 04-Aug-2020 Crystek Corporation reserves the right to make changes to its Ethernet, Gigabit Ethernet products and/or information contained herein without notice. Page 1 of 2 No liability is assumed as a result of its use or application. 16850 Oriole Road Fort Myers, Florida 33912 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION www.crystek.com CClock Oscillator C32xx/C39xx Model 57 mm SMD, 5V, HCMOS 0.283 (7.20) P/N YYWW 0.205 Frequency (5.20) 0.071 XX (1.80) Denotes pad 1 YYWW=Date Code XX=Lot Code 0.055 Typ. SUGGESTED PAD LAYOUT (1.40 Typ.) 1 2 0.045 0.008 0.165 (1.14 0.20) (4.19) 4 3 0.071 SQ (1.80) 0.200 0.005 0.200 (5.08 0.13) (5.08) 0.01uF Bypass Capacitor Recommended Dimensions inches (mm) All dimensions are Max unless otherwise specified. Enable/Disable Crystek Part Number Guide Function pin 1 Output pin C X 3 X 9 X - 44.736MHz Open Active 1 2 3 41 level 0.7Vcc Min Active Stability Indicator 1 Temp. Range: Blank = 0/70C, M = -20/70C, E = -40/85C0 level 0.3Vcc Max High Z 2 Symmetry: 2 = 40/60%, 9 = 45/55% 0 100ppm 3 Stability: (see Table 1) 2 50ppm 4 Frequency in MHz: 3 or 6 decimal places PIN Function 1 25ppm 8* 20ppm 1 E/D Example: *available in select frequencies -40/85 2 GND C3292-44.736MHz = 5.0V, 0/70C, 40/60%, 50ppm, 44.736MHz 3 OUT CM3991-44.736MHz = 5.0V, -20/70C, 45/55%, 25ppm, 44.736MHz Table 1 4 Vcc CE3290-44.736MHz = 5.0V, -40/85C, 40/60%, 100ppm, 44.736MHz TEST CIRCUIT mA OUT RECOMMENDED REFLOW SOLDERING PROFILE M Ramp-Up Critical Temperature pin 4 pin 3 3C/Sec Max. O/P Load Zone 260C Vcc OUT incl Probe Cl Ramp-Down PWR Bypass 6C/Sec. VM OSC. Supply Cap. 217C E/D GND 200C pin 1 pin 2 150C High Impedance Output Pin: Active GND orLO OPEN orHIG Preheat 90 Secs. Max. 180 Secs. Max. 8 Minutes Max. Rev: S 260C for 10 Secs. Max. Date: 04-Aug-2020 Crystek Corporation reserves the right to make changes to its NOTE: Reflow Profile with 240C peak also acceptable. products and/or information contained herein without notice. Page 2 of 2 No liability is assumed as a result of its use or application. 16850 Oriole Road Fort Myers, Florida 33912 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION www.crystek.com C TEMPERATURE