CCHD-575-25-25.000 Crystek

CCHD-575 Ultra-Low Phase Noise CCHD-575 Model Oscillator 57.5 mm SMD, 3.3V, HCMOS Model CCHD-575 is the industrys lowest jitter clock oscillator in a 57.5 mm package. It features a typical phase jitter of 82fs RMS at 100 MHz. Close-in phase noise is -90 dBc/Hz 10 Hz while its floor is at -168 dBc/Hz. This oscillator may be small in size but it packs a punch inside. Its output driver is capable of driving 24mA. This translates to a rise/fall time of ~600ps at 100 MHz with a 15pF load. Applications include DACs ADCs Rev: V Low Phase Signal Sources Date: 29-Jun-2020 Test and Measurement Page 1 of 5 16850 Oriole Road Fort Myers, Florida 33912 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION www.crystek.com CCCHD-575 Ultra-Low Phase Noise CCHD-575 Model Oscillator 57.5 mm SMD, 3.3V, HCMOS Frequency Range: 12 MHz to 125 MHz* Temperature Range: 0C to +70C (Option M) -20C to +70C (Option X) -40C to +85C Storage: -45C to 90C Input Voltage: 3.3V 0.3V Input Current: 15mA Typical, 25mA Max Output: HCMOS Symmetry: 45/55% Max 50% Vdd Rise/Fall Time: 2ns Max 20% to 80% Vdd Logic: 0 = 10% Vdd Max 1 = 90% Vdd Min Load: 15pF Output Current: 24mA Max Phase Jitter: (12kHz~80MHz) 82fs RMS Typical 100 MHz Phase Noise Typical: See plot Phase Noise Floor: -168 dBc/Hz Typical, -165 dBc/Hz Max Sub-harmonics: None st Aging: <3ppm 1 year, <1ppm thereafter CCHD-575 Options: Temperature Range: 0C to +70C (20ppm, 25ppm, 50ppm) -20C to +70C (25ppm, 50ppm) -40C to +85C (25ppm, 50ppm) Part Number Example: CCHD-575X-25-100.000 = 3.3V, 45/55, -40C to +85C (25ppm), 100 MHz 0.295 -0.008 +0.035 RECOMMENDED REFLOW SOLDERING PROFILE (7.50 -0.20 +0.89) Ramp-Up Critical 3C/Sec Max. Temperature Zone 240C Ramp-Down 6C/Sec. Part Number 217C 0.200 0.015 Frequency (5.08 0.38) 200C 0.099 Max Date Code (2.50) 150C SUGGESTED PAD LAYOUT Denotes pad 1 Preheat 90 Secs. Max. 180 Secs. Max. via to 0.050 0.046 8 Minutes Max. ground (1.27) (1.16) 240C for 0.01F 10 Secs. Max. 4 3 *Standard Frequencies (MHz) 0.046 2 1 0.058 0.154 (1.16) (1.47) (3.91) 12.000 48.000 Pad Connection 4 3 16.924400 49.152 12 0.071 1 NC 22.579200 50.000 (1.80) 2 GND 24.000 54.000 0.200 3 Output 0.200 24.576 80.000 (5.08) (5.08) 4 Vdd 27.000 100.000 40.000 125.000 Rev: V 45.158400 PAD FINISH: Immersion Gold (ENIG) 5 micro inches maximum Date: 29-Jun-2020 Crystek Corporation reserves the right to make changes to its Page 2 of 5 products and/or information contained herein without notice. No liability is assumed as a result of its use or application. 16850 Oriole Road Fort Myers, Florida 33912 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION www.crystek.com C TEMPERATURE