CCO-983/985 Model 914 mm SMD, 3.3V/5V, SineWave Frequency Range: 50 MHz to 500 MHz Temperature Range: 25ppm, 0C to 70C (Option X) 50ppm, -40C to 85C Storage: -45C to 90C Input Voltage: 3.3V 0.3V 5.0V 0.5V Input Current: 30mA Max 3.3V 50mA Max 5.0V Output: True SineWave Output Power: 0 dBm Min Start-up time: 2ms Typical, 10ms Max Load 50 2nd Harmonic: -20 dBc Max Sub-Harmonics: (50 MHz ~ 170 MHz) None (171 MHz ~ 500 MHz) -40 dBc Typical, -35 dBc Max Period Jitter: (20,000 periods) <5ps RMS (1-sigma) Max Phase Jitter: 12 kHz~20 MHz <1ps RMS (1-sigma) Max 50 kHz~80 MHz <1ps RMS (1-sigma) Max Phase Noise Typ.: 10 Hz -50 dBc/Hz ( 311.04 MHz) 100 Hz -80 dBc/Hz 1 kHz -110 dBc/Hz 10 kHz -135 dBc/Hz 100 kHz -145 dBc/Hz st Aging: <3ppm 1 year, <2ppm every year thereafter Applications: 10 Gigabit Ethernet OC48: Forward Error Correction Broadband Networks SONET/SDH/DWD ATM Network/switch Telecom Designed using FR5 PCB & HFF crystal technology to provide a Low Noise, Low Jitter Crystal Oscillator with True Sinewave Output. TD-041205 Rev. J Specifications subject to change without notice. Page 1 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com0.560 0.040 CCO-983/985 Model (14.2) (1.01) 914 mm SMD, 3.3V/5V, SineWave CRYSTEK 1 2 Part Number 0.360 0.070 (9.14) Frequency (1.77) Crystek Part Number Guide 4 3 Date Code 0.200 CCO-983 X-500.000 (5.08) 1 2 3 4 0.560 (14.2) SUGGESTED PAD LAYOUT 0.050 0.210 1 Crystek 914 SMD SineWave Oscillator (1.27) (5.3) 2 Model 983 = 983=3.3V 985=5.0V 0.090 3 Temp. Range: Blank = 0/70C, X=-40/85C (2.28) 4 Frequency in MHz: 3 or 6 decimal places 0.280 Pad Connection (7.11) 1 N/C 2 GND Example: 3 OUT 0.200 CCO-983X-500.000 = 3.3V, -40/85C, 500.000 MHz (5.08) 4 Vdd Standard Frequencies MHz 77.7600 167.3317 RECOMMENDED REFLOW SOLDERING PROFILE Ramp-Up 155.5200 212.5000 Critical 3C/Sec Max. Temperature Zone 260C 156.2500 250.0000 Ramp-Down 6C/Sec. 161.1328 311.0400 217C 166.6286 200C 150C Preheat 90 Secs. Max. 180 Secs. Max. 8 Minutes Max. 260C for 10 Secs. Max. NOTE: Reflow Profile with 240C peak also acceptable. Mechanical: Shock: MIL-STD-883, Method 2002, Condition B Solderability: MIL-STD-883, Method 2003 Vibration: MIL-STD-883, Method 2007, Condition A Solvent Resistance: MIL-STD-202, Method 215 Resistance to Soldering Heat: MIL-STD-202, Method 210, Condition I or J Environmental: Thermal Shock: MIL-STD-883, Method 1011, Condition A Moisture Resistance: MIL-STD-883, Method 1004 Packaging: Tape/Reel: 100ea, 250ea, 500ea 24mm Tape TD-041205 Rev. J Specifications subject to change without notice. Page 2 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com TEMPERATURE