CCPD-575 57.5mm SMD Ultra-Low Phase Noise CCPD-575 Model LVPECL Clock Oscillator 57.5 mm SMD, 3.3V, LVPECL Model CCPD-575 has an industry leading phase noise for an LVPECL oscillator. The noise floor is typically -162 dBc/Hz This is at least 15 dB lower phase noise than most LVPECL oscillators on the market today. Close-in phase noise is also excellent -90 dBc/Hz for the 100 MHz variant. This overall ultra-low phase noise translates to a typical phase jitter of 65 fs RMS (12 kHz to 20 MHz) at 156.250 MHz. 57.5mm SMD Applications: Digital Video SONET/SDH/DWDM Storage Area Networks Broadband Access Ethernet, Gigabit Ethernet Rev: T Date: 02-Oct-2017 Page 1 of 4 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com CCCPD-575 57.5mm SMD Ultra-Low Phase Noise CCPD-575 Model LVPECL Clock Oscillator 57.5 mm SMD, 3.3V, LVPECL Frequency Range: 50.000 MHz to 156.250 MHz* *Standard Frequencies Frequency Stability Options: 20ppm, 25ppm, 50ppm (MHz) Operating Temperature Range: -40C to +85C 80.000 100.000 Storage Temperature Range: -45C to 90C 122.880 Input Voltage: 3.3V 0.3V 125.000 Input Current: 80mA Typical, 88mA Max 156.250 Output: Differential LVPECL Symmetry: 40/60% Max zero crossing point Rise/Fall Time: 300 ps Max (20% to 80%) Logic Terminated to Vdd-2V into 50 : 0=1.37 Min, 1.74 Max Output Low Voltage: Output High Voltage: 1=2.05 Min, 2.54 Max Disable Time: 200 ns Max Enable Time: 200 ms Max Phase Jitter: 12kHz~20MHz 65 fs RMS Typical 156.250 MHz Phase Noise: (See Plot Below) Sub-harmonics: None st Aging: <3ppm 1 year, <1ppm every year thereafter Part Number Example: CCPD-575X-20-100.000 3.3V, -40/85C, 20ppm, 100.000 MHz 100.000 MHz LVPECL 3.3V Rev: T Date: 02-Oct-2017 Page 2 of 4 Specifications subject to change without notice. 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com C