CCSO-914X True SineWave SAW Based Clock Oscillator 914mm SMD Ultra-Low Phase Noise SAW Clock 3.3 & 5.0 Volt Frequency Range: 245.760 MHz to 1500 MHz CCSO-914X3-250.000 Model CCSO-914X is a SAW (surface acoustic wave) Clock Oscillator (CCSO). SAW crystal technology provides low-noise and low-jitter performance with true sinewave output. Features include -145 dBc/Hz phase noise at 10 kHz offset at 1 GHz, 3.3V & 5V input voltage available, -40C to +85C operating temperature, FR5 PCB and 914 mm SMT package. The oscillator has no sub-harmonic and the second harmonic is typically -20 dBc. Applications include: Analog to Digital Converters (A/D Converters), System Clock for Network Clock Generator/ Synchronizer, Clock for DDS, Test and Measurement, Avionics, Point-to-Point Radios, and Multi-point Radios. Rev: Y Date: 20-May-2020 Page 1 of 5 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com CCCSO-914X True SineWave SAW Based Clock Oscillator 914mm SMD 3.3 & 5.0 Volt Frequency Range: 245.760 MHz to 1500 MHz Temperature Range: -40C to +85C Storage: -45C to 90C Input Voltage: (option 3) 3.3V 0.165V (standard) 5.0V 0.25V Frequency vs Temperature (Typical): 200ppm (-40/85) 150ppm (0/70) Input Current: 25mA Typical, 35mA Max Output: True SineWave Output Power: (3.3V) +5dBm Min into 50 Load (5.0V) +8dBm Min into 50 Load Start-Up Time: 2ms Typical, 10ms Max nd 2 Harmonic: -20dBc Typical, -15dBc Max Sub-Harmonics: None Phase Noise Typical 1 GHz: 1kHz -116 dBc/Hz 10kHz -145 dBc/Hz 100kHz -168 dBc/Hz 1MHz -170 dBc/Hz 10MHz -171 dBc/Hz -9 G-sensitivity: 0.910 per g 0.090 0.040 SUGGESTED PAD LAYOUT (2.29) (1.01) 0.050 0.560 (1.27) (14.2) 0.090 (2.29) CRYSTEK 0.050 1 2 (1.27) Part Number 0.360 0.180 0.280 0.280 (9.14) (4.57) (7.11) (7.11) Frequency 4 3 Date Code 0.125 0.100 0.200 0.040 (3.18) (2.54) (5.08) (1.02) 0.560 0.200 (14.2) (5.08) See PAD FINISH: Immersion Gold (ENIG) 5 micro inches maximum Table A Pad Connection Package Height Options 1 N/C 2 GND inches mm 3 Output Standard 0.210 5.33 4 Vdd Option L 0.135 3.43 Rev: Y Table A Date: 20-May-2020 Page 2 of 5 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com C