CVCO55BE-1950-2070 Crystek

MICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION MIN TYP MAX UNITS Lower Frequency: 1950 MHz Upper Frequency: 2070 MHz Tuning Voltage: 0.5 4.5 VDC Supply Voltage: 4.75 5.0 5.25 VDC Output Power: +2.0 +4.0 +6.0 dBm Supply Current: 18 mA nd Harmonic Suppression (2 Harmonic): -15 dBc Pushing: 1.5 MHz/V Pulling, all Phases: 3.0 MHz pk-pk Tuning Sensitivity: 40 MHz/V Phase Noise 10kHz offset: -98 dBc/Hz Phase Noise 100kHz offset: -120 dBc/Hz Load Impedance: 50 Input Capacitance: 30 pF Operating Temperature Range: -40 +85 C Storage Temperature Range: -45 +90 C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.comMICROWAVE A Division of Crystek Corporation SIDE VIEW BOTTOM VIEW Gold Finish RF Solder Mask 0.465 SQ (11.81 SQ) 0.030 Vcc (0.76) 0.100 0.052 (2.54) (1.32) 0.025 (0.64) 0.040 Vt (1.02) BOTTOM ORIENTATION MARK TOP VIEW Pad Connection 0.500 0.500 12 11 10 9 (12.70) 2 Vt 13 10 RF-OUTPUT 0.415 8 0.405 14 Vcc Others GROUND 0.315 14 7 0.305 CRYSTEK PAD LOCATION CVCO55BE 15 0.215 6 0.205 1950-2070 16 0.115 5 0.105 YYWW Unless otherwise specified, Dimensions are in: IN 0.000 12 34 (mm) Pad Location Dimensions are in: Inches TOP ORIENTATION MARK TAPE AND REEL 0.059 TYP 0.1570.004 (1.50 ) TYP (4.000.10) DIRECTION OF FEED 0.9450.012 (24.000.30) 0.6300.004 Drawing not to scale (16.000.10) Product Control: Crystek Part Number: CVCO55BE-1950-2070 Release Date: 28-Oct-2013 Specification is subject to change without notice Revision Level: F Responsible: C. Vales Page 2 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com 0.500 (12.70) 0.000 0.080 0.115 0.180 0.215 0.280 0.315 0.380 0.415 0.500 0.150 (3.81)