CVCO55CC-2400-2600 Crystek

MICROWAVE A Division of Crystek Corporation PERFORMANCE SPECIFICATION MIN TYP MAX UNITS Lower Frequency: 2400 MHz Upper Frequency: 2600 MHz Tuning Voltage: 1.0 12.0 VDC Supply Voltage: 7.6 8.0 8.4 VDC Output Power: +5.0 +7.0 +9.0 dBm Supply Current: 28 mA nd Harmonic Suppression (2 Harmonic) -15 -10 dBc Pushing: 0.5 1.0 MHz/V Pulling, all Phases: 3.0 5.0 MHz pk-pk Tuning Sensitivity: 20 MHz/V Phase Noise 10kHz offset: -110 -107 dBc/Hz Phase Noise 100kHz offset: -130 -127 dBc/Hz Load Impedance: 50 Input Capacitance: 28 pF Operating Temperature Range: -40 +85 C Storage Temperature Range: -45 +90 C Phase Noise (1 Hz BW, Typical) Tuning Curve (Typical) Page 1 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.comMICROWAVE A Division of Crystek Corporation BOTTOM VIEW SIDE VIEW RF 0.465 SQ Gold Finish (11.81 SQ) 0.220 0.030 Vcc (5.59) (0.76) 0.100 0.052 (2.54) (1.32) 0.025 Vt (0.64) 0.040 (1.02) TOP VIEW 0.500 (12.70) Pad Connection 0.500 12 11 10 9 2 Vt 13 10 RF-OUTPUT 0.415 8 0.405 14 Vcc CRYSTEK Others GROUND 0.315 14 7 0.305 CVCO55CC PAD LOCATION 2400-2600 15 0.215 6 0.205 YYWW 16 0.115 5 0.105 Unless otherwise specified, Dimensions are in: IN 0.000 12 34 (mm) Pad Location TOP ORIENTATION MARK Dimensions are in: Inches TAPE AND REEL 0.059 TYP 0.1570.004 (1.50 ) TYP (4.000.10) DIRECTION OF FEED 0.9450.012 (24.000.30) 0.6300.004 Drawing not to scale (16.000.10) Product Control: Crystek Part Number: CVCO55CC-2400-2600 Release Date: 03-Dec-2013 Specification is subject to change without notice Revision Level: B Responsible: C. Vales Page 2 of 2 12730 Commonwealth Drive Fort Myers, Florida 33913 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION Fax: 239-561-1025 www.crystek.com 0.500 (12.70) 0.000 0.080 0.115 0.180 0.215 0.280 0.315 0.380 0.415 0.500