CVHD-957 Ultra-Low Phase Noise VCXO CVHD-957 Model with Standby Mode 914 mm SMD, 3.3V, HCMOS 22.579200 MHz HCMOS 3.3V 45.158400 MHz HCMOS 3.3V 49.152 MHz HCMOS 3.3V Crysteks Model CVHD-957 HCMOS VCXO family has been designed specifically for High Definition Audio (HD Audio). It features a typical low close-in phase noise of -90 dBc/Hz 10 Hz offset, and a noise floor of -168 dBc/Hz. With this extreme low phase noise performance, you will Hear the Difference. It also features a Standby Function, that is, when placed in disable mode, the internal oscillator is completely shut down in addition to its output buffer being placed in Tri-State. This family is housed in a 914 mm SMT package and operates with a +3.3V power supply. Rev: L Date: 15-Jan-2019 Applications include: Digital Audio Broadcasting (DAB) Professional CD audio equipment Page 1 of 2 DACs and ADCs for HD audio 16850 Oriole Road Fort Myers, Florida 33912 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION www.crystek.com CCVHD-957 Ultra-Low Phase Noise VCXO CVHD-957 Model with Standby Mode 914 mm SMD, 3.3V, HCMOS Frequency Range: 10 MHz to 50 MHz Mechanical: Temperature Range: 0C to +70C Shock: MIL-STD-883, Method 2002, Condition B (Option M) -20C to +70C Solderability: MIL-STD-883, Method 2003 (Option X) -40C to +85C Vibration: MIL-STD-883, Method 2007, Condition A Storage: -45C to 90C Solvent Resistance: MIL-STD-202, Method 215 Resistance to Soldering Heat: MIL-STD-202, Method 210, Condition I or J Input Voltage: 3.3V 5% Input Current: 15mA Typical, 25mA Max Environmental: Input Current (Disabled Mode): 1.5mA Max Thermal Shock: MIL-STD-883, Method 1011, Condition A Input: Modulation Bandwidth: >10 kHz -3 dB Moisture Resistance: MIL-STD-883, Method 1004 Impedance: 50 kOhm Control Voltage: 1.65V 1.65V Developed Tuning Sensitivity: +85 ppm/V Typical Frequencies Frequency Pulling: 100ppm Min, 75ppm Min for 10 MHz variant Output: HCMOS 22.5792 MHz Symmetry: 40/60% Max 50%Vcc 24.576 MHz Rise/Fall Time: 3ns Max 20% to 80% Vcc 45.1584 MHz Logic: 0 = 10% Vcc Max 49.152 MHz 1 = 90% Vcc Min Load: 15pF Output Current: 24mA Max Disable Time: 200ns Max Start-up Time: 1ms Typical, 2ms Max Pin 1 Disable Current: -350A Max Phase Noise: -90 dBc/Hz at 10 Hz Typical for 22.5792 MHz and 24.576 MHz -80 dBc/Hz at 10 Hz Typical for 45.1584 MHz and 49.152 MHz Phase Noise Floor: -168 dBc/Hz Typical, -165 dBc/Hz Max Sub-harmonics: None st Aging: <3ppm 1 year, <1ppm thereafter 0.560 Side View (14.2) RECOMMENDED REFLOW SOLDERING PROFILE 0.560 900034 (See App Note listed on website) (14.2) CRYSTEK