Ultra-Low Phase Noise SineWave VCXO CVSS-945 Model 914 mm SMD, 5.0V, SineWave Frequency Range: 10 MHz to 125 MHz Temperature Range: 0C to 70C (Option X) -40C to 85C Storage: -45C to 90C Input Voltage: 5.0V 0.5V Control Voltage: 2.5V 2.5V Settability At Nominal: 2.5V 0.5V Tuning Sensitivity (Kv): +25 ppm/V Typical (Positive Slope) Input Current: 35mA Max Output: True SineWave Pullability APR: 20ppm Min Linearity: 10% Max Output Power: +5 dBm Min, +7 dBm Typical Start-up time: 2ms Typical, 5ms Max Load: 50 2nd Harmonic: -25 dBc Typical Sub-harmonics: None Modulation BW: >10kHz -3dB Phase Noise Typical: 10Hz -85 dBc/Hz ( 100MHz) 100Hz -120 dBc/Hz 1kHz -145 dBc/Hz 10kHz -168 dBc/Hz 100kHz -175 dBc/Hz 1MHz -175 dBc/Hz st Aging: <3ppm 1 year, <1ppm every year thereafter Absolute Maximum Ratings Parameter Rating Unit Input Supply Voltage +6.0 V Input Control Voltage +10.0 V 10 MHz Rev: S Crystek Corporation reserves the right to make changes to its Date: 16-Dec-2020 products and/or information contained herein without notice. No liability is assumed as a result of its use or application. Page 1 of 3 16850 Oriole Road Fort Myers, Florida 33912 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION www.crystek.com CUltra-Low Phase Noise SineWave VCXO CVSS-945 Model 914 mm SMD, 5.0V, SineWave 50 MHz CVSS-945-100.000 Rev: S Date: 16-Dec-2020 Page 2 of 3 16850 Oriole Road Fort Myers, Florida 33912 CRYSTEK Phone: 239-561-3311 800-237-3061 CORPORATION www.crystek.com C