206-12RAST CTS

Series 206RA Right Angle Panel DIP Switch Designed for panel applications, saves cost of right angle socket Available as SPST, SPDT, DPST, 3PST Optional tape seal for board spray washing Available with low profile, standard, or extended actuators Gold Plated Contacts Description The terminals are molded into the thermoset base and provide an electrostatic discharge shield rating to 22KV when the front row of terminals are connected to ground. The optimized gold plated contact design incorporates a dimple-to-flat surface wiping interface for long-term contact corrosion resistance, making the 206RA an ideal choice for many applications. Ordering Information Number of Number oB f Number of Type of Terminals Actuator Bottom Top Tape Actuation Series S Shipping Position Poles Thro ws S Swit ch Positions Height Epoxy Seal Seal Preset 206 - 1 2 1 RA LP S T N S RRRTTT T T T T 20212124 1 2 1 E E TTT T Code Spec. Code No. of poles T Code Spec. RA Right Angle TSS Blank For SPST Ship at OFF position 1 Single pole BLANK (SPST, DPST&3PST 2 Double poles only) 3 3 poles No. of switch Ship at ON position Code Spec. Code N (SPST, DPST&3PST positions Blank Standard (0.89mm/.035) only) 1 position Extended (3.43mm/.135) E 1 (Not available (SPST only) for SPST) Code Spec. Low profile (Flush) LP 2 2 positions (SPST&SPDT only) Blank For SPST 3 3 positions 1 Single throw 4 4 positions Double throws Code Top tape seal 5 5 p ositions 2 (Single pole Code Bottom epoxy seal Blank No top tape seal 6 6 p ositions only) Blank No epoxy seal Top tape seal for 7 7 positions S Epoxy seal Board spray washing 8 8 positions T (Not available for 9 9 positions extended actuator) 10 10 positions 12 12 positions 2020-7-1 Rev. C Page 1 of 4 2020 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 206RA Right Angle Panel DIP Switch Electrical Specifications Parameter Conditions & Remarks Min Max Unit SPST 2 12 SPDT 1 6 Circuit position DPST 1 6 1 4 3PST Initial 50 Contact Resistance milliohms At end of life 100 Insulation Resistance Between insulated terminals 1000 megohms 500 VAC between adjacent Dielectric Strength 1 minute switches Between adjacent closed Switch Capacitance 5.0 pF switches 100 mA Nonswitching Rating or or 50 VDC Mechanical and Environmental Actuation Life 10,000 cycles switching 50mA 24 VDC Soldering Maximum wave temperature, 260C for 5 seconds MSL Level 1 RoHS Lead-Free. Fully compliant to RoHS Directive 2011/65/EU and 2015/863/EU Per MIL-STD-202F, method 213B, condition A( 50Gs) Shock with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B ( .06 or 15Gs between 10 HZ to 2K HZ) with Vibration no contact inconsistencies greater than 1 microsecond Bottom epoxy seal optional Seal Tape seal optional Marking Special side or top marking available-consult CTS Packaging: Standard anti-static tube packaging Operating Temperature -55C to +85C Range Storage Temperature -40C to +85C Range 2020-7-1 Rev. C Page 2 of 4 2020 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.