206-4ST CTS

Series 206 Through-Hole DIP Switch Available with SPST, SPDT, DPST, 3PST circuit choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. Blue housing RoHS compliant Optional top tape seal for board spray washing Gold plated contacts Description The terminals are molded into the thermoset base and provide an electrostatic discharge shield rating to 22KV when front row of terminals are connected to ground. The optimized contact design incorporating a dimple-to- flat surface wiping interface for long-term contact corrosion resistance, making it the ideal choice for any circuit breaker and HVAC applications. Ordering Information Number of Number of B Number of Actuator Bottom Top Tape Actuation Series S Shipping Position Poles Thro ws S Switch Positions Height Epoxy Seal Seal Preset 206- 1 2 1 E S T N S RRRTTT T T T T 20212124 1 2 1 E E TTT T T Code No. of poles No. of switch Code Spec. Code TSS Code Spec. Blank For SPST positions BLANK Ship at OFF position 1 Single pole Blank Standard (0.89mm/.035) 1 1 position Ship at ON position 2 Double pole 2 2 positions Extended (3.43mm/.135) N (SPST, DPST & 3PST E (SPST only) 3 3 poles 3 3 positions only) Low profile (Flush) 4 4 positions LP (SPST & SPDT only) 5 5 p ositions 6 6 p ositions 7 7 positions Code Spec. 8 8 positions Blank For SPST 9 9 positions Code Top tape seal 1 Single throw 10 10 positions 2 Double throw Blank No top tape seal Code Bottom epoxy seal 12 12 p ositions Top tape seal Blank No epoxy seal (Not available for Epoxy seal T extended actuator S (Required for 206-1S) or 1-position SPST Notes: 1.Contact CTS for other common features not listed. DIP switch) 2. Not available in a Double Pole Double Thow (DPDT) construction 2020-12-16 Rev. G Page 1 of 5 2020 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 206 Through-Hole DIP Switch Electrical Specifications Parameter Conditions & Remarks Min Max Unit Initial 50 Contact Resistance milliohms At end of life 100 Insulation Resistance Between insulated terminals 1000 Megohms 500 VAC between Dielectric Strength 1 minute adjacent switches Between adjacent Switch Capacitance 5.0 pF closed switches 100 mA Nonswitching Rating or or 50 VDC SPST 1 12 Position SPDT 1 6 Position Circuit 1 6 Position DPST 1 4 Position 3PST Mechanical and Environmental Actuation Life (206) 10,000 cycles switching 50mA 24VDC Soldering Maximum wave temperature, 260C for 5 seconds Per MIL-STD-202F, method 213B, condition A(50Gs) Shock with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B (.06 or 15Gs between 10 HZ to 2K HZ) with Vibration no contact inconsistencies greater than 1 microsecond Bottom epoxy seal optional Seal Optional top tape seal for board spray washing Marking Special side or top marking available-consult CTS Packaging: Standard anti-static tube packaging Operating Temperature -55C to +85C Range Storage Temperature -55C to +85C Range 2020-12-16 Rev. G Page 2 of 5 2020 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.