208-3LPST CTS

Series 208 Through-Hole DIP Switch Available with SPST circuit choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. Black housing RoHS compliant Optional top tape seal for board spray washing Description The terminals are molded into the thermoset base and provide an electrostatic discharge shield rating to 22KV when front row of terminals are connected to ground. Tin plated contact design incorporating a dimple-to-flat surface wiping interface for contact corrosion resistance, making it the economical choice for suitable applications. Ordering Information Top Tape Actuation Number of Actuator Bottom Series S Shipping Position Seal Preset S Switch Positions Height Epoxy Seal 208- 1 E S T N No. of switch Code Spec. Code Code Spec. positions Blank Standard (0.89mm/.035) BLANK Ship at OFF position 1 1 position E Extended (3.43mm/.135) 2 2 positions N Ship at ON position LP Low profile (Flush) 3 3 positions 4 4 positions 5 5 p ositions Code Bottom epoxy seal 6 6 p ositions Blank No epoxy seal 7 7 positions Epoxy seal S 8 8 positions (Required for 208-1S) 9 9 positions 10 10 positions Code Top tape seal 12 12 p ositions Blank No top tape seal Top tape seal (Not available for T extended actuator or 1-position SPST DIP switch) Notes: 1.Contact CTS for other common features not listed. 2020-6-30 Rev. B Page 1 of 4 2020 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. Series 208 Through-Hole DIP Switch Electrical Specifications Parameter Conditions & Remarks Min Max Unit Initial 100 Contact Resistance milliohms At end of life 500 Insulation Resistance Between insulated terminals 1000 Megohms 500 VAC between Dielectric Strength 1 minute adjacent switches Between adjacent Switch Capacitance 5.0 pF closed switches 100 mA Nonswitching Rating or or 50 VDC Circuit SPST 1 12 Position Mechanical and Environmental Actuation Life 2,000 cycles switching 50mA 24VDC Soldering Maximum wave temperature, 260C for 5 seconds Per MIL-STD-202F, method 213B, condition A(50Gs) Shock with no contact inconsistencies greater than 1 microsecond Per MIL-STD-202F, method 204D, condition B (.06 or 15Gs between 10 HZ to 2K HZ) with Vibration no contact inconsistencies greater than 1 microsecond Bottom epoxy seal optional Seal Optional top tape seal for board spray washing Marking Special side or top marking available-consult CTS Packaging: Standard anti-static tube packaging Operating Temperature -55C to +85C Range Storage Temperature -55C to +85C Range 2020-6-30 Rev. B Page 2 of 4 2020 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.