Data SheetData Sheet Series 209/210 Through Hole DIP Switch Electrocomponents AUTO-DIP Switch Automatically Insertable, Wave Solderable, Board Washable DIP Switch Features Optimized Mechanical Features Fully sealed to withstand insertion shock, wave solder temperatures, and board washing Positive detent separated from contactor Compatible with Amistar, DynaPert, Universal, NETCO assembly and other machines Optimized Contact System Redundant, wiping contact Contactor does not deflect during actuation Available low profile, medium and extended height actuator Materials Series 209 - gold plated beryllium copper contacts Series 210 - gold flash plated beryllium copper contacts High temperature materials (UL94V-0) RoHS compliant Series 209 Premium AUTO-DIP Switches Series 210 Economical AUTO-DIP Switches Electrical and Mechanical Specifications Switch Function Allowable Solder Time SPST- 2 through 10 and 12 positions Up to 5 seconds at 260C Vibration Switch Contact Resistance Per MIL-STD-202F, method 204D, condition B Switch Serie s Initial, max . End of life, max. (.06 or 15 Gs between 10 HZ to 2K HZ) with no 209 25 milliohms 50 millohms contact inconsistencies greater than 1 microsecond. 210 100 milliohms 500 millohms Shock Insulation Resistance Per MIL-STD-202F, method 213B, condition A 1,000 megohms minimum between (50 Gs) with no contact inconsistencies greater insulated terminals than 1 microsecond. Dielectric Strength Sealing 500 VDC for 1 minute between adjacent Standard bottom seal switches Optional top tape seal Nonswitching Rating 100 mA or 50 VDC maximum Operating Temperature Switch Capacitance 40C to +85C 5 pF maximum between adjacent closed switches Packaging Actuation Life Standard : Anti-Static tube packaging Series 209: 2,000 cycles switching 100 mA, 20 VDC or .1 mA, 5 VDC (dry circuit) Series 210: 1,000 cycles switching 100 mA, 20 VDC or .1 mA, 5 VDC (dry circuit) 2008 CTS Corporation. All rights reserved. Information subject to change. 12/30/08 1 - 2 CTS Electrocomponents www.ctscorp.com CTS AUTO-DIP SERIES CON TACT FE ATURES 1. Value of Redundant (Bifurcated) Contacts: Redundancy dramatically reduces the probability of contact failure, IMPROVING 2. Wiping contact action RELIABILITY. 2. Value of Wiping Contact Action: Clean contact area, IMPROVING RELIABILITY. 3. Value of Contactor Not Deflecting 1. Redundant (bifurcated) During Actuation : Constant contact cross radial pressure eliminates overstressing contactor contacts, IMPROVING RELIABILITY. 4. Detent separate 4. Value of Detent Separate from 3. Contactor does not from contactor deflect during actuation Contactor: Separate detent allows optimization of nondeflecting contactor and detent designs, IMPROVING RELIABILITY. NO. OF +0.15 8.00 SWITCH 0.25 -0.00 OVERALL +.005 .315 .010 POSITIONS DIMENSION -.000 1.0 X45 CHAMFER (2) 6.55/.258 2 .039 0.70 TRAVEL .028 9.09/.358 3 DATE CODE 11.63/.458 4 ON CTS 14.17/.558 5 6.700.25 3.62 +0.64 16.71/.658 6 .264.010 .143 8.25 -0.38 +.025 .325 19.25/.758 7 -.015 1 2 3 4 5 10 11 12 AUTO INSERTABLE TERMINAL 21.79/.858 8 24.33/.958 9 SERIES DESIGNATION(209, 210) 26.87/1.058 10 31.95/1.258 12 +0.15 8.00 0.25 -0.00 0.30 +.005 .315 .010 .012 -.000 +0.05 3.80 -0.10 7.62 4.58 max +.002 .150 .300 -.004 TYP. 3.2 +0.64 .126 7.62 -0.38 2.54 +.025 .300 .100 -.015 TYP. STRAIGHT TERMINAL 2.54 0.550.08 .100 .022.003 TYP. TYP. mm 1.50 0.8 TYP. DIMENSION: .059 inch TYP. Ordering Information D 209/210 12 M S T F BLANK : SHIP AT ON POSITION F : SHIP AT OFF POSITION XX: NO. OF POSITION BLANK : NO TOP TAPE SEAL E: EXTENDED HEIGHT ACTUATOR(0.6mm/.024) BLANK : AUTO-INSERTABLE TERMINAL T: TOP TAPE SEAL * D : STRAIGHT TERMINAL M: MEDIUM ACTUATOR(0.25mm/.010) Not available on Extended * actuator LP: LOW PROFILE (Flush) S: BOTTOM SEAL 2008 CTS Corporation. All rights reserved. Information subject to change. 12/30/08 2 - 2 CTS Electronic Components www .ctscorp.com 209