Model CB3 & CB3LV HCMOS/TTL Clock Oscillator FEATURES Standard 7.0mm x 5.0mm 4-Pad Surface Mount Package HCMOS/TTL Compatible Output rd Fundamental and 3 Overtone Crystal Designs Frequency Range 1 200 MHz Frequency Stability 50 ppm Standard, 25 ppm and 20 ppm Available Operating Voltages +5.0Vdc or +3.3Vdc Operating Temperature to -40C to +85C Output Enable Standard Tape & Reel Packaging RoHS/Green Compliant (6/6) APPLICATIONS Applications for Model CB3 and CB3LV include digital video, networking equipment, wireless communications, broadband access, Ethernet/Gigabit Ethernet, microprocessors/DSP/FPGA, storage area networks, fiber channel, computers and peripherals, test and measurement, SONET/SDH/DWDM, base stations and Pico cells. ORDERING INFORMATION CB3 - - M SUPPLY VOLTAGE FREQUENCY IN MHz LV = +3.3Vdc 3 M - indicates MHz and decimal point. Blank = +5.0Vdc FREQUENCY STABILITY OPERATING TEMPERATURE RANGE 1 C = -20C to +70C standard 2 6 = 20 ppm 7 = 32 ppm 1 I = -40C to +85C 5 = 25 ppm 2 2 = 100 ppm 3 = 50 ppm std 1 6I Stability/Temperature combination is not available. 2 These stabilities are not recommended for new designs. 3 Frequency is recorded with only leading significant digits before the M and 4 - 6 significant digits after the M (including zeros). Ex. 3.579545 MHz, code as 3M579545 14.31818 MHz, code as 14M31818 125 MHz, code as 125M0000 4 CTS Distributors may add a -T or -1 at the end of the part number to indicate Tape and Reel packaging. Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. PACKAGING INFORMATION reference Device quantity is 1,000 pieces maximum per reel. Document No. 008-0256-0 Page 1- 3 Rev. G www.ctscorp.com Model CB3 & CB3LV 7.0mm x 5.0mm Low Cost HCMOS/TTL Clock Oscillator ELECTRICAL CHARACTERISTICS CONDITIONS PARAMETER SYMBOL MIN TYP MAX UNIT V - Maximum Supply Voltage -0.5 - +7.0 V CC T - Storage Temperature -40 - +100 C STG Frequency Range f CB3 - 1.5 - 107 MHz O CB3LV - 1.5 - 200 f/f See Note 1 and Ordering Information Frequency Stability - - 20,25,50 or 100 ppm O First year Aging f- 3 5 ppm Operating Temperature T - C Commercial A -20 +70 25 -40 Industrial +85 Supply Voltage V 10% V CB3 CC 4.5 5.0 5.5 CB3LV 3.0 3.3 3.6 Frequency Range Supply Current Tested load condition noted for typical values. CB3 1.5MHz to 20MHz C =50pF -10 25 L 20.001MHz to 80MHz C =50pF -30 50 L I mA CC 80.001MHz to 107MHz C =15pF -40 80 L CB3LV 1.5MHz to 20MHz C =15pF -7 12 L 20.001MHz to 80MHz C =15pF -20 40 L C =15pF 80.001MHz to 200MHz -30 60 L 1.5MHz to 50MHz - - 50 C 50.001MHz to 80MHz Output Load - - 30 pF L 80.001MHz to 200MHz - - 15 Output Voltage Levels Logic 1 Level 90%V CMOS Load CC V -- OH V 10 TTL LOAD V -0.6V CC Logic 0 Level CMOS 10%V CC V -- OL TTL Load 0.4 Output Current I V = 3.9V/2.2V V = 4.5V/3.0V mA Logic 1 Level OH CC - - -16/-8 OH I V = 0.4V V = 4.5V/3.0V Logic 0 Level OL CC -- +16/+8 OL Output Duty Cycle SYM 50% Level 45 - 55 % 10% - 90% Levels Rise and Fall Time Tested load condition noted for typical values. CB3 1.5MHz to 20MHz C =50pF -8 10 L 20.001MHz to 80MHz C =50pF -5 8 L T , T ns R F 80.001MHz to 200MHz C =15pF -2.5 5 L CB3LV 1.5MHz to 20MHz C =15pF -6 8 L C =15pF 20.001MHz to 80MHz -3 5 L C =15pF 80.001MHz to 200MHz -1.5 3 L Application of V Start Up Time T -- 10 ms S CC Enable Function V Pin 1 Logic 1 , Output Enabled V Enable Input Voltage 2.0 - - IH V Pin 1 Logic 0 , Output Disabled Disable Input Voltage -- 0.8 IL Enable Time T Pin 1 Logic 1 -- 200 ns PLZ Standby Current I Pin 1 Logic 0 , Output Disabled -- 10 A ST Period Jitter, Pk-Pk - - - - 50 - ps Period Jitter, RMS - - - 5 Bandwidth 12kHz - 20MHz Phase Jitter, RMS - - - 1 Notes: 1. Inclusive of initial tolerance at time of shipment, changes in supply voltage, load, temperature and 1st year aging. Document No. 008-0256-0 Page 2 - 3 Rev. G ELECTRICAL PARAMETERS