INCH-POUND
MIL-C-11015/10F
W/AMENDMENT 1
6 March 2007
SUPERSEDING
MIL-C-11015/10F
14 May 2001
MILITARY SPECIFICATION SHEET
CAPACITORS, FIXED, CERAMIC DIELECTRIC (GENERAL PURPOSE),
STYLE CK61
This specification is approved for use by all Depart-
ments and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and MIL-C-11015.
INACTIVE FOR NEW DESIGN AFTER 31 MARCH 1999.
FOR REPLACEMENT PURPOSES ONLY.
Inches mm
.001 .03
.004 .10
.025 .64
.035 .89
NOTES:
.040 1.02
1. Dimensions are in inches.
.060 1.52
2. Metric equivalents are given for general information only.
.120 3.05
3. Insulating coating shall not extend more than .125 (3.18 mm) along lead wires
.250 6.35
measured from a tangent to the coating surface drawn perpendicular to the lead
.350 8.89
wires.
1.250 31.75
FIGURE 1. Dimensions and configuration.
AMSC N/A FSC 5910 MIL-C-11015/10F
W/AMENDMENT 1
TABLE I. Style CK61 characteristics.
PIN 1/ Rated Rated temperature Capacitance Capacitance
voltage and voltage- tolerance
temperature limits
Volts, dc pF
CK61CZ2R2-- 500 CZ 2.2 K, M
CK61CZ3R3-- 500 CZ 3.3 K, M
CK61CZ4R7-- 500 CZ 4.7 K, M
CK61CZ6R8-- 500 CZ 6.8 K, M
CK61CZ100-- 500 CZ 10 K, M
CK61CZ150-- 500 CZ 15 K, M
CK61CZ220-- 500 CZ 22 K, M
CK61CZ330-- 500 CZ 33 K, M
CK61CZ470-- 500 CZ 47 K, M
CK61CZ680-- 500 CZ 68 K, M
CK61CZ101-- 500 CZ 100 K, M
CK61CZ151-- 500 CZ 150 K, M
CK61BX221-- 500 BX 220 K, M
CK61CZ221-- 500 CZ 220 K, M
CK61BX331-- 500 BX 330 K, M
CK61CZ331-- 500 CZ 330 K, M
CK61BX471-- 500 BX 470 K, M
CK61CZ471-- 500 CZ 470 K, M
CK61BX681-- 500 BX 680 K, M
CK61AW222M- 500 AW 2,200 M
1/ Where applicable, the complete PIN will include an additional symbol to indicate capacitance tolerance. The PIN
will also include the letter E to indicate an epoxy coated capacitor (when applicable) or - will be deleted for wax
impregnated case.
REQUIREMENTS
Design and construction:
Dimensions and configuration - See figure 1.
Case type - Disk, wax impregnated or epoxy coated (E).
Capacitance value - See table I.
Capacitance tolerance - 10 percent (K) or 20 percent (M) as shown in table I.
* Rated temperature - -55 C to +85 C (A), or -55 C to +125 C (B), or -55 C to +150 C (C), as shown in table I.
Dielectric withstanding voltage(DWV): In accordance with MIL-C-11015.
Dielectric:
Test voltage - 250 percent of rated voltage.
Body insulation:
Test potential - 1,300 volts dc.
2