ATSSMLP Series Low Profile Quartz Crystal Features Low Profile HC-49/US-SM Metal Package rd Fundamental and 3 Overtone Crystal Design Frequency Range 3.2 64MHz Frequency Tolerance, 30ppm Standard Part Dimensions: Frequency Stability, 30ppm Standard 11.1 4.83 3.2mm 587.84mg Operating Temperature Range -20C to +70C or -40C to +85C Tape and Reel Packaging, EIA-418 Applications Wireless Communications Microprocessors Broadband Access Test and Measurement FPGA/Microcontrollers Consumer Electronics Computer Peripherals Portable Equipment Description CTS ATSSMLP incorporates a high Q quartz resonator in a proven resistance-weld metal package. ATSSMLP offers tight stability options that are ideal for supporting a wide range of commercial and industrial applications. Ordering Information Frequency Code Mode of Tolerance Temperature Temperature Load Packaging Model MHz Oscillation +25C Stability Range Capacitance LP XXX F 3 3 I D T Code Frequency Code Tolerance Code Temp. Range Code Packing 10ppm -20C to +70C Tape & Reel 1 C T 1 Product Frequency Code X 15ppm I -40C to +85C 20ppm 2 Y 25ppm 30ppm 3 Code Mode Code Stability Code Capacitance Code Capacitance 2 F Fundamental 1 K 8pF D 18pF 10ppm T 3rd Overtone X 15ppm J 9pF E 20pF 20ppm 10pF 24pF 2 A F Y 25ppm L 12pF G 30pF 30ppm 13pF 32pF 3 B H 5 50ppm C 16pF S Series Notes: 1 Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz. 2 Check factory availability when combined with -40C to +85C temperature range. Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification. DOC 008-0363-0 Rev. B Page 1 of 4 2017 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. ATSSMLP Series Low Profile Quartz Crystal Electrical Specifications Operating Conditions PARAMETER SYMBO L CO NDITIO NS MIN TYP MAX UNIT -20 +70 Operating Temperature T - +25 C A -40 +85 Storage Temperature T - -40 - +125 C STG Frequency Stability PARAMETER SYMBO L CO NDITIO NS MIN TYP MAX UNIT Frequency Range f - 3.2 - 40 MHz Fundamental O 24 - 64 3rd Overtone Frequency Tolerance f/f +25C 10, 15, 20, 25 or 30 ppm O Frequency Stability f/f Referenced to +25C reading 10, 15, 20, 25, 30 or 50 ppm 25 Aging f/f Typical per year +25C -5 3 5 ppm 0 Crystal Parameters PARAMETER SYMBO L CO NDITIO NS MIN TYP MAX UNIT Fundamental or 3rd Overtone Operating Mode - - - AT-Cut Crystal Cut - - - Load Capacitance C - See Ordering Information pF L Shunt Capacitance C - - - 7.0 pF 0 Series Resistance 3.2MHz - <4.0MHz - - 150 4.0MHz - <5.0MHz - - 120 5.0MHz - <8.0MHz - - 80 Fundamental R1 8.0MHz - <12.0MHz - - 60 12.0MHz - <20.0MHz - - 40 20.0MHz - 40.0MHz - - 30 24.0MHz - <48.0MHz - - 80 3rd Overtone R1 48.0MHz - 64.0MHz - - 60 Drive Level DL - - 100 1000 W Insulation Resistance R +100Vdc 15Vdc 500 - - M i f/f - Frequency deviation referenced to nominal frequency. 0 f/f25 - Frequency deviation over operating temperature range, referenced to +25C frequency. DOC 008-0363-0 Rev. B Page 2 of 4 2017 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.