SA254 Series Automotive Grade Quartz Crystal Features AEC-Q200 Compliant Hermetic Ceramic Surface Mount Package Fundamental Crystal Design Frequency Range 12 80MHz Frequency Tolerance, 30ppm Standard Part Dimensions: 2.5 2.0 0.65mm 9.37mg Frequency Stability, 50ppm Standard Operating Temperature Range to -55C to +125C Standard Frequencies see Page 5 for developed frequencies. * Check with factory for availability of frequencies not listed. Tape and Reel Packaging, EIA-418 Applications Automotive Electronics Internet of Things IoT, IIot Ethernet/GbE/SyncE Mobile Multimedia/Infotainment Microcontrollers and FPGAs Medical Electronics Car Navigation Systems Wireless Communication Commercial Military & Aerospace Description CTS Model SA254 incorporates a low cost, high Q, small size quartz resonator specifically developed to operate over extended temperature ranges for use in automotive electronics. Ordering Information Frequency Code Mode of Tolerance Temperature Temperature Load Model Packaging MHz Oscillation +25C Stability Range Capacitance F 3 5 G A SA254 XXX R Code Frequency Code Tolerance Code Temp. Range Code Packing 2 1 10ppm I R 3k pcs./reel -40C to +85C 1 Product Frequency Code 3 15ppm X G -40C to +105C 4 20ppm 2 H -40C to +125C 5 30ppm 3 N -40C to +150C 5 5 50ppm P -55C to +105C 5 M -55C to +125C Mode Stability Capacitance Capacitance Code Code Code Code Fundamental 15ppm 7pF 16pF F X V C 20ppm 8pF 18pF 2 K D 3 30ppm J 9pF E 20pF 5 50ppm A 10pF F 24pF 6 100ppm L 12pF G 30pF 150ppm 13pF Series 7 B S Notes: 1 Refer to document 016-1454-0, Frequency Code Tables. 3-digits for frequencies <100MHz, 4-digits for frequencies 100MHz or greater. 2 Available with all stability codes. 3 Available with stability codes 3, 5, 6 and 7. 4 Available with stability codes 5, 6 and 7. 5 Stability codes 6 and 7. Contact factory for code 5 availability. Not all performance combinations and frequencies may be available. Contact your local CTS Representative or CTS Customer Service for availability. This product is specified for use only in standard commercial applications. Supplier disclaims all express and implied warranties and liability in connection with any use of this product in any non-commercial applications or in any application that may expose the product to conditions that are outside of the tolerances provided in its specification. DOC 008-0583-0 Rev. C Page 1 of 5 2017 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote. SA254 Series Automotive Grade Quartz Crystal Electrical Specifications Operating Conditions PARAMETER SYMBO L CO NDITIO NS MIN TYP MAX UNIT -40 +85 -40 +105 -40 +125 Operating Temperature T - +25 C A -40 +150 -55 +105 -55 +125 Storage Temperature T - -55 - +125 C STG Frequency Stability PARAMETER SYMBO L CO NDITIO NS MIN TYP MAX UNIT Frequency Range f Fundamental mode 12 - 80 MHz O 10, 15, 20, 30 or 50 Frequency Tolerance f/f +25C ppm O 15, 20, 30, 50, 100 or 150 Frequency Stability f/f Referenced to +25C reading ppm 25 Aging f/f Typical per year +25C -3 - 3 ppm 0 Crystal Parameters PARAMETER SYMBO L CO NDITIO NS MIN TYP MAX UNIT Operating Mode - - Fundamental - Crystal Cut - - AT-Cut Strip - See Ordering Information Load Capacitance C - pF L Shunt Capacitance C - - - 3.0 pF 0 Series Resistance 12MHz - <16MHz - - 180 16MHz - <20MHz - - 150 Fundamental R 1 20MHz - <30MHz - - 80 30MHz - 80MHz - - 60 Drive Level DL - - 10 200 W Insulation Resistance R +100Vdc 15Vdc 500 - - M i f/f0 - Frequency deviation referenced to nominal frequency. f/f25 - Frequency deviation over operating temperature range, referenced to +25C frequency. DOC 008-0583-0 Rev. C Page 2 of 5 2017 CTS Corporation. Information/product(s) subject to change. No warranty that product(s) will meet the stated specifications for customer specific applications or test equipment. Visit www.ctscorp.com for list of applicable patent(s), more information, or to request a quote.