ADP-40KD BBBM Delta

TECHNICAL DATASHEET ADP Series Power Adapters 19V 40W/65W/90W ADP 19V Highlights & Features Energy Star Compliance (Level VI) IT safety approvals 100k Hours MTBF Over-Voltage/Load/Temperature & Short Circuit protections Low Leakage Current Safety Standards CB Certified for worldwide use Model Information ADP Series Power Adapters Model Number Input Voltage Range Output Voltage Output Current ADP-40KD BBBM 90-264Vac 19Vdc 2.1A ADP-65JH HBAN 90-264Vac 19Vdc 3.42A ADP-90MD HDM 90-264Vac 19Vdc 4.74A Specifications Input Ratings / Characteristics ADP-40KD BBBM ADP-65JH HBAN ADP-90MD HDM Nominal Input Voltage 100-240Vac Input Voltage Range 90-264Vac Nominal Input Frequency 50-60Hz Input Frequency Rang 47-63Hz 1.2A Max at 100Vac input Input Current 1.5A Max at 100Vac input voltage voltage Inrush Current Limit (cold start) No Damage Efficiency at nominal input voltage 85% 84% Active Mode Efficiency 115Vac >88% Active Mode Efficiency 230Vac >85.30% >87% >88% <0.1W 115Vac/60Hz , No Load Power Consumption <0.21W 115Vac/60Hz <0.3W 230Vac/50Hz Leakage Current <100uA at 240Vac/50Hz <50uA at 240Vac/50Hz <75uA at 240Vac/50Hz www.DeltaPSU.com (January 2016, Rev. 1.0) 1 TECHNICAL DATASHEET ADP Series Power Adapters 19V 40W/65W/90W Output Ratings / Characteristics ADP-40KD BBBM ADP-65JH HBAN ADP-90MD HDM Rated Voltage 19V Voltage Range 18.05 ~ 19.95V Current 2.1A 3.42A 4.74A Output Ripple and Noise 350 mV pk-pk 300mV pk-pk 380mV pk-pk Turn On delay time 5 seconds 100-240Vac 2 seconds 100-240Vac The output voltage shall be sustained 5mS within regulation requirement after loss 100Vac Hold-up Time and maximum load. DC output rise time from 10% to 90% of output DC output rise time from 10% to 90% of output voltage shall be Rise Time voltage shall be less than less than 100ms at nominal line and maximum load 30mS at nominal line and maximum load 0% to 50% and 50% to 100% 0.1A to 100% load at 2.5A/us slew rate and frequency is Transient Load Response 1.0A/us slew rate and frequency 10Hz to 10KHz is 100Hz Environment ADP-40KD BBBM ADP-65JH HBAN ADP-90MD HDM Operating Temperature 0 C to +40 C Shipping/Storage Temperature -30 C to +80 C -20 C to +85 C. Operating Humidity 8% to 90% RH (Non-Condensing) Shipping/Storage Humidity 5% to 95% RH (Non-Condensing) IEC-1000-4-5 Level 3 IEC-61000-4-5 Level 3 requirements Requirements Lightning Surge Immunity L-N 1KV/1.2 * 50uS 5 times No function error L-N 1KV/1.2 * 50uS 5 L-FG 2KV/1.2 * 50uS 5 times No damage. times No damage IEC-1000-4-4/1995 Electric Fast Transients (EFT) EN 61000-4-4 15KV air discharge Electrostatic Discharge (ESD) 8KV contact discharge Between AC input and Between AC input and secondary AC 3KV test secondary AC 3KV test time 100% of line products of this time 1 minute 100% of line 1 minute 100% of line Adapter shall be applied products of this Adapter products of this Adapter Dielectric Withstand Voltage (HI- 3000Vac for 1 seconds between shall be applied 3000Vac shall be applied 3000Vac POT) AC input terminals and output for 2 seconds between AC for 2 seconds between AC terminals. Cut off current is input terminals and output input terminals and output 10mA. terminals. Cut off current terminals. Cut off current 3mA. 10mA. The insulation resistance shall The insulation resistance shall be not less than 30M ohms be not less than 20M ohms after Insulation Resistance after application of 500Vdc/10mA for 1 minute. application of 500Vdc/10mA for 1 minute (a) FCC Class B (a) FCC Class B (a) FCC Class B Electromagnetic Interference (EMI) (b) CISPR 22 Class B (b) CISPR 22 Class B (b) CISPR 22 Class B (c) VCCI Class B (c) VCCI Class B (c) VCCI Class B MTBF 150,000 hours 100,000 hours Altitude 5,000m (16,400 ft) www.DeltaPSU.com (January 2016, Rev. 1.0) 2