FEATURES High efficiency: 89.5% 2.5V/35A Size: 58.4mm x 22.8mm x9.5mm (2.30x0.90x0.37) Industry standard pin out Fixed frequency operation Input UVLO, Output OTP, OCP, OVP Monotonic startup into normal and pre-biased loads 2250V Isolation and basic insulation No minimum load required No negative current during power or enable on/off ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950-1 (US & Canada) Recognized, and TUV (EN60950-1) Certified CE mark meets 73/23/EEC and 93/68/EEC directives Delphi Series E48SH, 120W Eighth Brick Family DC/DC Power Modules: 48V in, 2.5V/35A out The Delphi Series E48SH Eighth Brick, 48V input, single output, OPTIONS isolated DC/DC converters are the latest offering from a world leader in Positive On/Off logic power systems technology and manufacturing Delta Electronics, Inc. Short pin lengths available This product family is available in either a through-hole or External Synchronization surface-mounted package and provides up to 120 watts of power or Output OVP latch mode 50A of output current (1.2V and below) in an industry standard footprint Heat spreader and pinout. The E48SH converter operates from an input voltage of 36V to 75V and is available in output voltages from 1.0V to 15V. Efficiency is 89.5% for 2.5V output at 35A full load. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as APPLICATIONS extremely high reliability under highly stressful operating conditions. All Telecom / DataCom models are fully protected from abnormal input/output voltage, current, Wireless Networks and temperature conditions. The Delphi Series converters meet all Optical Network Equipment safety requirements with basic insulation. Server and Data Storage Industrial / Test Equipment DATASHEET DS E48SH2R535 11182014 TECHNICAL SPECIFICATIONS (T =25C, airflow rate=300 LFM, V =48Vdc, nominal Vout unless otherwise noted.) A in PARAMETER NOTES and CONDITIONS E48SH2R535 (Standard) Min. Typ. Max. Units ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous 75 Vdc Transient (100ms) 100ms 100 Vdc Operating Temperature Refer to Figure 21 for measuring point -40 128 C Storage Temperature -55 125 C Input/Output Isolation Voltage 2250 Vdc INPUT CHARACTERISTICS Operating Input Voltage 36 75 Vdc Input Under-Voltage Lockout Turn-On Voltage Threshold 33 34 35 Vdc Turn-Off Voltage Threshold 31 32 33 Vdc Lockout Hysteresis Voltage 1 2 3 Vdc Maximum Input Current 100% Load, 36Vin 3.4 A No-Load Input Current 50 mA Off Converter Input Current 4 mA 2 2 Inrush Current(I t) 1 A s Input Reflected-Ripple Current P-P thru 12H inductor, 5Hz to 20MHz 20 mA Input Voltage Ripple Rejection 120 Hz 50 dB OUTPUT CHARACTERISTICS Output Voltage Set Point Vin=48V, Io=Io.max, Tc=25C 2.475 2.5 2.525 Vdc Output Voltage Regulation Over Load Io=Io,min to Io,max 3 10 mV Over Line Vin=36V to 75V 3 10 mV Over Temperature Tc=-40C to 115C 15 mV Total Output Voltage Range over sample load, line and temperature 2.463 2.538 V Output Voltage Ripple and Noise 5Hz to 20MHz bandwidth Peak-to-Peak Full Load, 1F ceramic, 10F tantalum 30 60 mV RMS Full Load, 1F ceramic, 10F tantalum 10 20 mV Operating Output Current Range 0 35 A Output DC Current-Limit Inception Output Voltage 10% Low 105 135 % DYNAMIC CHARACTERISTICS Output Voltage Current Transient 48V, 10F Tan & 1F Ceramic load cap, 0.1A/s Positive Step Change in Output Current 50% Io.max to 75% Io.max 60 mV Negative Step Change in Output Current 75% Io.max to 50% Io.max 60 mV Settling Time (within 1% Vout nominal) 100 us Turn-On Transient Start-Up Time, From On/Off Control 15 25 ms Start-Up Time, From Input 15 25 ms Maximum Output Capacitance Full load no overshoot of Vout at startup 10000 F EFFICIENCY 100% Load 89.5 % 60% Load 91 % ISOLATION CHARACTERISTICS Input to Output 2250 Vdc Isolation Resistance 10 M Isolation Capacitance 1500 pF FEATURE CHARACTERISTICS Switching Frequency 250 kHz ON/OFF Control, Negative Remote On/Off logic Logic Low (Module On) Von/off at Ion/off=1.0mA 1.2 V Logic High (Module Off) Von/off at Ion/off=0.0 A 3 50 V ON/OFF Control, Positive Remote On/Off logic Logic Low (Module Off) Von/off at Ion/off=1.0mA 1.2 V Logic High (Module On) Von/off at Ion/off=0.0 A 3 50 V ON/OFF Current (for both remote on/off logic) Ion/off at Von/off=0.0V 1 mA Leakage Current (for both remote on/off logic) Logic High, Von/off=15V 50 uA Output Voltage Trim Range Across Pins 9 & 5, Pout max rated power -20 10 % Output Voltage Remote Sense Range Pout max rated power 10 % Output Over-Voltage Protection Over full temp range % of nominal Vout 120 140 % GENERAL SPECIFICATIONS MTBF Io=80% of Io, max 300LFM 25 3.4 M hours Weight 25 grams Over-Temperature Shutdown Refer to Figure 21 for measuring point 135 C E48SH2R535 11182014 2