FEATURES High efficiency: 89% 1.5V/40A Size: 58.4mm x 22.8mm x 9.5mm (2.30x0.90x0.37) Industry standard pin out Fixed frequency operation Input UVLO, Output OTP, OCP, OVP Monotonic startup into normal and pre-biased loads Secondary control, very fast transient response 2250V Isolation and basic insulation No minimum load required SMD and through-hole versions No negative current during power or enable on/off ISO 9001, TL 9000, ISO 14001, QS 9000, OHSAS 18001 certified manufacturing facility UL/cUL 60950 (US & Canada) recognized, and TUV (EN60950) certified CE mark meets 73/23/EEC and 93/68/EEC directive Delphi Series E48SH, 120W Eighth Brick Family DC/DC Power Modules: 48V in, 1.5V/40A out OPTIONS The Delphi Series E48SH Eighth Brick, 48V input, single output, isolated DC/DC converters are the latest offering from a world leader in power Positive On/Off logic systems technology and manufacturing Delta Electronics, Inc. This Short pin lengths available product family is available in either a through-hole or surface-mounted External Synchronization package and provides up to 120 watts of power or 50A of output current Output OVP latch mode (1.2V and below) in an industry standard footprint and pinout. The E48SH Output OCP latch mode converter operates from an input voltage of 36V to 75V and is available in Heat spreader output voltages from 1.0V to 15V. Efficiency is 89% for 1.5V output at 40A full load. With creative design technology and optimization of component placement, these converters possess outstanding electrical and thermal performance, as well as extremely high reliability under highly stressful operating conditions. All models are fully protected from abnormal APPLICATIONS input/output voltage, current, and temperature conditions. The Delphi Series Telecom/DataCom converters meet all safety requirements with basic insulation. Wireless Networks Optical Network Equipment Server and Data Storage Industrial/Test Equipment DATASHEET DS E48SH1R540 11012013 TECHNICAL SPECIFICATIONS (T =25C, airflow rate=300 LFM, V =48Vdc, nominal Vout unless otherwise noted.) A in PARAMETER NOTES and CONDITIONS E48SH1R540 (Standard) Min. Typ. Max. Units ABSOLUTE MAXIMUM RATINGS Input Voltage Continuous 75 Vdc Transient (100ms) 100ms 100 Vdc Operating Temperature Refer to Figure 21 for measuring point -40 125 C Storage Temperature -55 125 C Input/Output Isolation Voltage 2250 Vdc INPUT CHARACTERISTICS Operating Input Voltage 36 75 Vdc Input Under-Voltage Lockout Turn-On Voltage Threshold 33 34 35 Vdc Turn-Off Voltage Threshold 31 32 33 Vdc Lockout Hysteresis Voltage 1.5 2 2.5 Vdc Maximum Input Current 100% Load, 36Vin 2.2 A No-Load Input Current 50 mA Off Converter Input Current 3 mA 2 2 Inrush Current(I t) 1 A s Input Reflected-Ripple Current P-P thru 12H inductor, 5Hz to 20MHz 20 mA Input Voltage Ripple Rejection 120 Hz 50 dB OUTPUT CHARACTERISTICS Output Voltage Set Point Vin=48V, Io=Io.max, Tc=25C 1.485 1.5 1.515 Vdc Output Voltage Regulation Over Load Io=Io,min to Io,max 3 10 mV Over Line Vin=36V to 75V 3 10 mV Over Temperature Tc=-40C to 85C 15 mV Total Output Voltage Range over sample load, line and temperature 1.47 1.53 V Output Voltage Ripple and Noise 5Hz to 20MHz bandwidth Peak-to-Peak Full Load, 1F ceramic, 10F tantalum 30 60 mV RMS Full Load, 1F ceramic, 10F tantalum 10 20 mV Operating Output Current Range 0 40 A Output DC Current-Limit Inception Output Voltage 10% Low 110 140 % DYNAMIC CHARACTERISTICS Output Voltage Current Transient 48V, 10F Tan & 1F Ceramic load cap, 0.1A/s Positive Step Change in Output Current 50% Io.max to 75% Io.max 30 mV Negative Step Change in Output Current 75% Io.max to 50% Io.max 30 mV Settling Time (within 1% Vout nominal) 100 us Turn-On Transient Start-Up Time, From On/Off Control 10 ms Start-Up Time, From Input 10 ms Maximum Output Capacitance Full load no overshoot of Vout at startup 40000 F EFFICIENCY 100% Load 89 % 60% Load 90.5 % ISOLATION CHARACTERISTICS Input to Output 2250 Vdc Isolation Resistance 10 M Isolation Capacitance 1500 pF FEATURE CHARACTERISTICS Switching Frequency 200 kHz ON/OFF Control, Negative Remote On/Off logic Logic Low (Module On) Von/off at Ion/off=1.0mA 1.2 V Logic High (Module Off) Von/off at Ion/off=0.0 A 3 50 V ON/OFF Control, Positive Remote On/Off logic Logic Low (Module Off) Von/off at Ion/off=1.0mA 1.2 V Logic High (Module On) Von/off at Ion/off=0.0 A 3 50 V ON/OFF Current (for both remote on/off logic) Ion/off at Von/off=0.0V 1 mA Leakage Current (for both remote on/off logic) Logic High, Von/off=15V 50 uA Across Pins 9 & 5, Pout max rated power Output Voltage Trim Range -20 10 % Output Voltage Remote Sense Range Pout max rated power 10 % Output Over-Voltage Protection Over full temp range % of nominal Vout 1.8 V GENERAL SPECIFICATIONS MTBF Io=80% of Io, max 300LFM 25C 2.05 M hours Weight 20 grams Over-Temperature Shutdown Refer to Figure 21 for measuring point 130 C E48SH1R540 11012013 2