PE01S2405A Delta

PE01S/D series 1W DC/DC CONVERTER, SIP-Package, High Efficiency FEATURES Efficiency up to 88.5% SIP Package with Industry Standard Pinout Semi-regulated Output Voltage Isolation Voltage 1000VDC Operating Temperature Range 40C to +85C UL/IEC/EN 60950-1 Safety Single and Dual Outputs Lead free, RoHs Compliant >2 MHours MTBF CSA / NRTL60950-1 safety approval 3 Years Product Warranty The PE01S/D series are miniature, SIP Package, isolated 1W DC/DC converters with 1,000VDC isolation and very high efficiency . It offers short circuit protection and allows a wide operating temperature range of 40C to +85C. These products provide a typical load regulation of 2.5% to 5.0% depending on each model. The PE01S/D DC/DC converters are a compromise between a fully regulated converter and a non-regulated converter . These isolated DC/DC converters are the latest offering from a world leader in power systems technology and manufacturing Delta Electronics, Inc. Model List Model Input Output Output Current Input Current Load Reflected Max. capacitive Efficiency Number Voltage Voltage Regulation Ripple Load (typ.) (Range) Max. Min. Max.Load No Load Max.oad VDC VDC mA mA mA(typ.) mA(typ.) % (max.) mA(typ.) uF % PE01S0505A 5 200 4 238 6.5 84 PE01S0509A 9 110 2 228 5 87 220 PE01S0512A 12 84 1.5232 5.2 87 PE01S0515A 15 5 67 1 230 5 87.5 30 7 PE01D0505A (4.5 ~ 5.5) 5 100 2 237 5.2 84.5 PE01D0509A 9 56 1 234 4.2 86 100* PE01D0512A 12 42 0.8233 4.6 86.5 PE01D0515A 15 34 0.7 236 4.5 86.5 PE01S1205A 5 200 4 99 5 84 PE01S1209A 9 110 2 95 3.4 86.5 220 PE01S1212A 12 84 1.595 3.4 88.5 PE01S1215A 15 12 67 1 95 2.7 88 12 4 PE01D1205A (10.8 ~ 13.2) 5 100 2 99 3.9 84.5 PE01D1209A 9 56 1 98 2.8 86 100* PE01D1212A 12 42 0.895 2.9 88.5 PE01D1215A 15 34 0.7 94 2.6 87.5 PE01S2405A 5 200 4 50 3.7 84 PE01S2409A 9 110 2 48 2.5 86.5 220 PE01S2412A 12 84 1.548 2.4 87.5 PE01S2415A 15 24 67 1 48 2.3 87.5 11 8 PE01D2405A (21.6 ~ 26.4) 5 100 2 50 3.7 83.5 PE01D2409A 9 56 1 49 2.5 86 100* PE01D2412A 12 42 0.848 2.4 87 PE01D2415A 15 34 0.7 49 2.3 87 * For each output DS PE01S/D 03152012 E-mail: DCDC delta.com.tw Input Characteristics Parameter Model Min. Typ. Max. Unit 5V Input Models -0.7 --- 9 Input Surge Voltage (1 sec. max.) 12V Input Models -0.7 --- 18 24V Input Models -0.7 --- 30 VDC 5V Input Models 4.5 5 5.5 Input Voltage Range 12V Input Models 10.8 12 13.2 24V Input Models 21.6 24 26.4 Reverse Polarity Input Current All Models --- --- 0.3 A Input Filter Internal Capacitor Internal Power Dissipation --- --- 450 mW Output Characteristics Parameter Conditions Min. Typ. Max. Unit Output Voltage Balance Dual Output, Balanced Loads --- 0.1 1.0 % Line Regulation For Vin Change of 1% --- 1.05 1.2 % Load Regulation Io=20% to 100% See Model Selection Guide Ripple & Noise (20MHz) --- 30 60 mV P-P Temperature Coefficient --- 0.01 0.02 %/ Short Circuit Protection 0.5 Second Max. General Characteristics Parameter Conditions Min. Typ. Max. Unit I/O Isolation Voltage (rated) 60 Seconds 1000 --- --- VDC I/O Isolation Resistance 500 VDC 1000 --- --- M I/O Isolation Capacitance 100KHz, 1V 40 60 120 pF Switching Frequency 50 100 120 KHz MIL-HDBK-217F 25, MTBF (calculated) 2,000,000 --- --- Hours Ground Benign Safety Approvals CSA 60950-1 recognition, IEC/EN 60950-1(CB-scheme) Recommended Outside Input Fuse 5V Input Models 12V Input Models 24V Input Models 500mA Slow-Blow Type 200mA Slow-Blow Type 100mA Slow-Blow Type Environmental Specifications Parameter Conditions Min. Max. Unit Operating Temperature Range Ambient -40 +85 (without Derating) Case Temperature --- +95 Storage Temperature Range -50 +125 Humidity (non condensing) --- 95 % rel. H Cooling Free-Air convection Lead Temperature --- 260 (1.5mm from case for 10Sec.) DS PE01S/D 03152012 E-mail: DCDC delta.com.tw